MKP385510100JPP2T0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film Capacitors

Film capacitors, also known as Plastic Film Capacitors, are electrical components used in the field of electrical engineering for various applications. They are mainly used in applications where a low signal level must be maintained or when transient high voltage spikes are present. Film capacitors are also known for their robust design and long life expectancy. This makes them suitable for a wide range of applications, including, audio, video, communications and power electronics.

The MKP385510100JPP2T0 is a Film Capacitor manufactured by KEMET, a worldwide supplier of electronic components. The MKP385510100JPP2T0 is a Polyester (PET) Film Capacitor and has a Capacitance range of 0.47μF to 1.0μF at a rated voltage of 250V AC/DC. The MKP385510100JPP2T0 can be used in various industrial, professional, consumer electronics, and automotive applications.

Application Field of MKP385510100JPP2T0

The MKP385510100JPP2T0 is suitable for use in high current circuits, consumer electronics, automotive electronics, computer motherboards, digital set top boxes, printers and many other applications where voltage is high.

• It has a low dielectric absorption which is ideal for high frequency applications.
• It also has a high insulation resistance resulting in minimal power loss
• It can be used in circuits with high voltage spikes or transients due to its high peak current capabilities.
• It has a low temperature coefficient.
• Its construction is simple and robust which makes it reliable for long usage
• It also has a high ripple current capacity which makes it suitable for use in DC to DC converters.
• It has a high voltage rating which makes it suitable for use in circuits with high voltage environments.

Working Principle of MKP385510100JPP2T0

Film capacitors are made up of a dielectric film that is sandwiched between two metalized electrodes. The dielectric film is usually made of polyester, polypropylene or paper films. The metalized electrodes are usually made of aluminum or copper. The dielectric film and metalized electrodes are sandwiched between two plates made of the same material. When two electrodes are connected to a circuit, an electrostatic field is generated in the space between the electrodes. This electrostatic field stores electrical charge in the dielectric material. The capacitance of the capacitor is determined by the amount of charge stored in the electrostatic field.

The MKP385510100JPP2T0 is a film capacitor that has a high voltage rating and is able to handle large transients and high frequency operation. They also have good heat dissipation and can handle large amounts of current. The capacitor acts as a charge storage device in a circuit. When the voltage is applied to the capacitor, charge is stored and released as and when required by the circuit. This enables the capacitor to provide a low signal level and handle transient high voltage spikes in the circuit.

In conclusion, the MKP385510100JPP2T0 is a film capacitor which is suitable for a wide range of industrial, professional, consumer electronics, and automotive applications. Its robust design and long life expectancy make it an ideal component for various electrical and electronic applications. It has a high voltage rating and is able to handle large transients and high frequencies. It is also able to store charge and release it as and when required by the circuit.

The specific data is subject to PDF, and the above content is for reference