MKP385510160JPI2T0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film Capacitors

Film capacitors are, very simply, capacitors that make use of an insulating film between their conducting plates. They can be either non-polarized or polarized, since the insulating films used in their construction can be manufactured from both polyester and polypropylene. This type of capacitor has many applications since it has a high insulation resistance, low dissipation factor and a large capacitance value that can range from picofarads to dozens of farads. Additionally, they can be used in a wide variety of temperature and frequency ranges.

The MKP385510160JPI2T0 is an example of a film capacitor that can be used in many applications. This type of capacitor has a standard operating temperature range of -40 degrees Celsius to 85 degrees Celsius and an insulation resistance of 6kV at 25 degrees Celsius. It has a capacitance value of 160μF, a voltage rating of 400V DC and a dissipation factor of 6.3x10-4.

One of the most common uses of the MKP385510160JPI2T0 film capacitor is in power electronics. This type of capacitor is commonly used in AC/DC filter circuits to reduce the 60Hz hum. By using the capacitor in parallel with an inductive load, the capacitor\'s capacitive reactance cancels out the inductive reactance, resulting in a smoother DC output. Additionally, other power electronics circuits such as switching power supplies, phase-controlled rectifiers, and other rectification circuits make use of these type of capacitors for components such as snubbers and filter networks.

The MKP385510160JPI2T0 film capacitor is also commonly used in motor control circuits. This type of capacitor provides dampening of the rotating field of the motor, which in turn allows for a more accurate control of the torque and speed of the motor. This is due to the capacitor\'s ability to limit the voltage across the motor’s windings. Because of this capability, this type of capacitor is a vital element in the electronic control of both AC and DC motors.

The working principle of a film capacitor is quite simple. When a voltage is applied to the plates of the capacitor, the electrical field equalizes across the insulating film; in turn, an electrical current flows through the film. This current is stored as a charge on the capacitor and causes the capacitance to increase. As the charge builds up, the voltage across the plates of the capacitor rises, and the current decreases. This process continues until the voltage across the plates of the capacitor reaches the applied voltage of the power source. At this point, the capacitor is fully charged and no more current can flow through the capacitor. Although this process happens very quickly, it allows the capacitor to act as a store of energy, which can then be used to supply a voltage or current to other devices, as seen in the examples above.

The specific data is subject to PDF, and the above content is for reference