MKP385511160JPP4T0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are frequently used for applications which require high insulation resistance, high temperature stability, and a relatively long lifetime. The MKP385511160JPP4T0 is a film capacitor manufactured by a Japanese-based company. It is designed for various applications, including consumer electronics, telecom, automotive, and light industrial equipment.

The MKP385511160JPP4T0 is a polyester film capacitor which features a high dielectric strength of 4kVdc. It also has a maximum rated voltage of 200Vdc, making it suitable for most commercial electronic applications. It has a capacitance of 11uF, a leakage current of 140 microamps, and a dissipation factor of only 0.0001 at 1kHz. These characteristics make it well-suited for decoupling and signal filtering circuits.

The MKP385511160JPP4T0 features a working temperature range of -40 to +85 degrees Celsius, making it suitable for use in various environmental conditions. The capacitor has a temperature coefficient of 100ppm/degC, meaning it is stable over time. The capacitor has a maximum short-term pulse voltage of 2.5kV, and a lifetime that is rated at 5000 hours under the following conditions: +25 degrees Celcius, 122 Vrms, 60Hz AC.

The MKP385511160JPP4T0 is relatively small in size, measuring 16mm x 5.7mm x 11mm. It has an extremely low initial leak current, meaning it will not cause any high frequency interference with the surrounding wireless circuitry. The inductance of the capacitor is also much lower than that of its larger counterparts, so it helps to reduce noise and reduce distortion in circuit designs.

The working principle of film capacitors relies heavily on the dielectric materials used in their manufacture. In the MKP385511160JPP4T0, the dielectric is a polyester film, which has a low dielectric constant and a high dielectric strength. The dielectric acts as an electrical insulation between the two conductive metal plates and creates a capacitive field between them. When a voltage is applied to the capacitor, an electric field is created between the plates, and the dielectric material stores the charge. This is how the capacitor stores energy and is capable of releasing it back out.

The MKP385511160JPP4T0 is designed for use in various applications. It is suitable for use in consumer electronics, telecom, automotive and light industrial applications, where it can be used in decoupling and signal filtering circuits. The capacitor is also suitable for use in various environmental conditions, as it has a wide working temperature range. The small size and low inductance of the film capacitor make it well-suited for use in circuit designs which require low-noise performance and low distortion.

The specific data is subject to PDF, and the above content is for reference