MLF2012DR56JTD25

DC Resistance (DCR):	550 mOhm Max
Height - Seated (Max):	0.057" (1.45mm)
Size / Dimension:	0.079" L x 0.049" W (2.00mm x 1.25mm)
Supplier Device Package:	0805 (2012 Metric)
Package / Case:	0805 (2012 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	25MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	AEC-Q200
Frequency - Self Resonant:	150MHz
Q @ Freq:	25 @ 25MHz
Series:	MLF
Shielding:	Shielded
Current - Saturation:	--
Current Rating:	150mA
Tolerance:	±5%
Inductance:	560nH
Material - Core:	Ferrite
Type:	Multilayer
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Fixed inductors, also known as henrys, are electronic components that store energy in the form of an electric charge or magnetic field. They are typically used in applications where a specific amount of energy is required for an electric circuit to perform its intended task. One of the most commonly used types of fixed inductors is the MLF2012DR56JTD25. The MLF2012DR56JTD25 is a cylindrically shaped, surface-mount, fixed inductor created by Murata Manufacturing. It is typically used in applications where high frequency-range is required, such as switched-mode power supplies, radio-frequency circuits, and other high-frequency electronic devices. The MLF2012DR56JTD25 has a rated inductance value of 0.12μH and a rated current of 16.2A. In terms of its applications, the MLF2012DR56JTD25 is suitable for use in cellular phones, digital cameras, computers, digital TVs, and other electronic equipment. It can also be used as an EMI filter for power supplies and other high-frequency circuits. The MLF2012DR56JTD25 is specifically designed to help reduce electromagnetic interference in electronic circuits. In terms of its working principle, fixed inductors work by mean of a magnetic field. When an electric current passes through the inductor, a magnetic field is created around it. The electric current induces an electric voltage across the inductor which acts as a magnetic flux, inducing a voltage across the inductor proportional to the current. This creates a back EMF voltage which is advantageous in certain types of circuits such as oscillators and flip-flops. The MLF2012DR56JTD25 can also be used as an inductor filter. This type of filter uses its inductive properties to separate signals from a single electric source. As the frequency of the signal changes, the inductance value also changes which affects the signal strength. This is useful in applications where signal noise needs to be filtered out or signals need to be amplified.Overall, the MLF2012DR56JTD25 is an advanced surface mount fixed inductor designed to meet the requirements of high frequency circuits. It is suitable for use in cellular phones, digital cameras, computers, digital TVs, and other electronic equipment. Its inductive properties allow it to be used as an EMI filter and an inductor filter. The MLF2012DR56JTD25 is a valuable component for any high-frequency system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description