MLX91210KDF-CAS-101-SP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Current transducers, also known as current transformers, are devices used in electric power systems to measure the current signals of the power grids. By taking advantage of the low-impedance nature of transformers, current transducers convert high currents in power system into a current that is proportional to the original current but at a lower magnitude. MLX91210KDF-CAS-101-SP is one way to measure current transducers. This application field and working principle of current transducers will be discussed below.

Application Field

MLX91210KDF-CAS-101-SP can be used in a variety of applications, including power system monitoring, measurement and control. A typical application of current transducers is power grid monitoring. By using the transducer to measure the current in the grid, it can be used to identify problems in the system, monitor system performance and detect abnormal conditions. It can also be used to integrate multiple energy sources into the grid, by allowing the generation and transmission of current from multiple sources in a single grid. The current transducer can be also used in the protection of AC/DC power systems, as it can detect over-current and short-circuit conditions.

Working Principle

The MLX91210KDF-CAS-101-SP current transducer consists of two components: an exciter and a receiver. The exciter contains a coil and magnets. The magnets are used to generate a magnetic field when the current transducer is connected to the power system. The receiver consists of a voltage coil and a secondary coil. When the magnetic flux generated by the exciter is linked to the secondary coil, it produces a voltage signal in the receiver, which is proportional to the original current in the power system. This voltage signal is then transmitted to a control unit or monitoring system.

The working principle of current transducers is quite simple. By using a transformer to link a high-current source to a secondary coil, they can be used to measure current in a power system or other electrical circuits. They are relatively cheap and easy to install and can provide accurate measurements of current in a range of applications.

In conclusion, MLX91210KDF-CAS-101-SP is a current transducer used to measure current in power systems and other electrical circuits. It works by linking a high-current source to a secondary coil and then converting the current into a voltage signal. This voltage signal can then be transmitted to a control or monitoring unit. MLX91210KDF-CAS-101-SP is used in a variety of applications, including power system monitoring, measurement and control, as well as the protection of AC/DC power systems.

The specific data is subject to PDF, and the above content is for reference