MMT-142-01-S-DH

Rectangular Connectors - Headers, Male Pins

MMT-142-01-S-DH application field and working principle

The MMT-142-01-S-DH is a two piece Surface Mount Through Hole Interconnect connector. It is designed to connect two printed circuit boards (PCBs) and can be used in a variety of applications. Its basic construction consists of two mating halves, each with a female and a male pin, with the pins being located on two sides of the connector. The top half has the male pin while the bottom half has the female pin. This allows the two halves to be connected and provides an electrical connection between the two PCBs. The pins are arranged in a specific pattern so that the connector is not easily damaged or disconnected during operation.

The MMT-142-01-S-DH is a through hole connector meaning that it is designed to be connected via soldering wires from one pin to the other. There is also a second option where the connector can be soldered onto the boards. This option is more practical when connecting to multiple pins or when the connector needs to be mounted to the board vertically. The MMT-142-01-S-DH comes in two types, one with a locking lever that can be used to secure the connector to the board, and one without a locking lever.

The working principle of the MMT-142-01-S-DH connector is essentially the same as other interconnect connectors. The pins of the two halves are soldered together and the connector is then mounted onto the two PCBs. The package contains four basic parts; the female pin, the male pin, and two nuts. The female pin is soldered onto the board first, followed by the male pin. The nuts are then used to secure the pins to the boards. Once the two halves are connected, an electrical connection is established between them.

The MMT-142-01-S-DH connector can be used in a variety of applications such as communications, automotive, power systems, and medical devices. Its design allows it to withstand vibration and shock, and it can be used in high humidity environments. The connector has good resistance to solder reflow and it can be mounted both horizontally and vertically. It is also corrosion resistant and is UL approved, making it an ideal solution for a wide range of applications.

The MMT-142-01-S-DH connector is an excellent solution for applications where a reliable interconnect connection between two printed circuit boards is required. Its design allows for easy installation and it can be used in a variety of applications. Its M4 nut helps to secure the two halves together and its corrosion-resistant exterior makes it an ideal choice for applications that require a reliable connection.