MNR14E0ABJ183

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A resistor network, also known as a resistor array, is a collection of resistors connected in a predetermined order. Resistor networks are used in a variety of applications to serve as controlling elements in power paths or current limiting circuits. The MNR14E0ABJ183 is a surface mounted resistor array, and its properties and working principle allows for its use in a wide range of applications.

The MNR14E0ABJ183 is a 4-resistor network array. The 4 resistors are connected in a configuration with the first two resistors being parallel connected, and then connected in series with the third and fourth resistors. This creates a total of four resistors connected together to allow for the control of power and current in a circuit.

The MNR14E0ABJ183 has a resistance value of 7.5KOhm. The first two resistors in the array are connected in a parallel configuration and each have a 3.6Kohm resistance value. The third and fourth resistors in the array are connected in series and each have a resistance value of 1.95Kohm. This configuration creates a total resistance of 7.5KOhm.

The MNR14E0ABJ183 can be used in a variety of applications. It is commonly used in power control circuits and current limiting circuits. As an example, if the MNR14E0ABJ183 is used in a power control circuit, it can be used to control the amount of power that is supplied to an electrical component. This ensures that the electrical component isn’t over powered and that its components are not damaged.

The MNR14E0ABJ183 can also be used as a current limiting circuit. This means that it allows a certain amount of current to pass through it, but if the current is too high, it will limit the current in order to protect the circuit from damage. This application is useful in a variety of circuits that may be susceptible to high power surges.

The MNR14E0ABJ183 can also be used in a variety of configurations. In particular, it is commonly used in a voltage divider configuration. This configuration allows for the output of a voltage that is half of the input voltage, and can be used to control the voltage of a circuit.

The MNR14E0ABJ183 can also be used as a voltage regulator. This means that the MNR14E0ABJ183 is able to maintain a certain voltage level even if the input voltage changes. This is useful for applications where it is important to maintain a certain level of voltage in order to ensure that a circuit will not be damaged.

The MNR14E0ABJ183 is a versatile resistor array, and is commonly used for its power control and current limiting applications. It is easy to configure in a variety of configurations, and its ability to control power and current levels helps to ensure the safety of circuits in a variety of applications.

The specific data is subject to PDF, and the above content is for reference