MNR18ERAPJ472

Number of Pins:	16
Height - Seated (Max):	0.020" (0.50mm)
Size / Dimension:	0.157" L x 0.063" W (4.00mm x 1.60mm)
Supplier Device Package:	--
Package / Case:	1606, Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±250ppm/°C
Power Per Element:	62.5mW
Series:	MNR
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±5%
Resistance (Ohms):	4.7k
Circuit Type:	Isolated
Part Status:	Discontinued at Digi-Key
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks and arrays are components comprised of multiple resistors connected to each other in unique combinations. The purpose of these networks and arrays is to provide impedance matching between multiple circuits, thus allowing electronic signals to propagate at higher rates, and with better signal quality, than they normally would. While there are a variety of resistor network and array configurations, the MNR18ERAPJ472 is a particularly popular one, and its application field and working principle is worth exploring.

The MNR18ERAPJ472 is a resistor network made up of 18 resistors enclosed in a single, standard-sized package. This type of configuration gives the MNR18ERAPJ472 many advantages, chief among them being that it has a very small footprint on a circuit board. And in addition to its size, it provides excellent frequency response and low noise characteristics. This is why it is well-suited for high-frequency applications, such as in radio frequency (RF) circuits.

The working principle of the MNR18ERAPJ472 is fairly straightforward. It consists of 18 identical resistors, each rated at 8k ohms, connected together in an 8×8 array. This configuration allows for impedance loads to be balanced along 4 lines, which helps reduce the amount of cross-talk and noise present in an electronic signal. This also helps to provide a more consistent signal quality throughout an entire circuit. In addition, because the resistors are connected in an array, the voltage is distributed evenly, meaning more power is available to the system.

Aside from its use in RF circuits, the MNR18ERAPJ472 is also commonly found in sensory applications. This is because the array configuration of the device is well-suited for applications such as touch sensors and proximity detection. It can also be used to detect movement and orientation, and can be used in feedback loops for motor control.

The MNR18ERAPJ472 is also a popular choice for automotive applications. The device can be used in both audio and video systems to balance impedance and reduce noise. It can also be used to control voltage fluctuation in electrical power systems, and to provide a safe and efficient power flow in ABS systems.

In short, the MNR18ERAPJ472 is a versatile and reliable resistor network and array device that has a multitude of applications in both consumer and industrial electronics. Its semiconductor construction provides excellent frequency response and low noise characteristics, and its array configuration allows it to be used in a variety of different applications. Because of this, it is a popular choice for electrical engineers looking for a reliable and cost-effective resistor network or array solution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description