MNR18ERAPJ821

Number of Pins:	16
Height - Seated (Max):	0.020" (0.50mm)
Size / Dimension:	0.157" L x 0.063" W (4.00mm x 1.60mm)
Supplier Device Package:	--
Package / Case:	1606, Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±250ppm/°C
Power Per Element:	62.5mW
Series:	MNR
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±5%
Resistance (Ohms):	820
Circuit Type:	Isolated
Part Status:	Discontinued at Digi-Key
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Resistor Networks, Arrays, MNR18ERAPJ821 is a type of component used when a precise amount of current or voltage needs to be applied to a device or circuit. It is not a single resistor, but a network of resistors arranged in a non-standard format to create a unique voltage or current when connected to a device or circuit. The application of these resistors can vary depending on the specific device or circuit, but there are a few basic principles that apply to all applications.

Application Field

MNR18ERAPJ821 can be used to transfer and control current and voltage in circuit applications. One of the main applications for this resistor is in current control and voltage regulation. When connected to a power supply, the resistor allows the current to pass through in a controlled manner, while also providing a level of protection for the circuit or device from excess current.This resistor can also be used to provide feedback signals in circuit designs, such as in operational amplifiers. When connected to the amplifier, the resistor provides feedback to the amplifier\'s output stage, allowing it to adjust the output level according to the feedback signal.MNR18ERAPJ821 can also be found in switched power supplies. In such applications, the resistor keeps the voltage and current at a steady level, and the voltage is switched between the desired levels as needed. Finally, these resistors can also be used to provide damping in motor control circuits.

Working Principle

The working principle of MNR18ERAPJ821 is fairly simple. The resistor is a network of resistors that are connected in series and parallel. The current passes through the network of resistors, and the response is determined by the combined resistance of the entire network. The voltage or current output is determined by the number of resistors in the network, the total combined resistance, and the voltage or current input.When connected to a device or circuit, the resistor is typically connected in series or parallel with the device or circuit. When the resistor is connected in series, the resistance of the resistor determines the amount of current that can flow through the device or circuit. When the resistor is connected in parallel, the voltage across the resistor determines the amount of current that can flow through the device or circuit.

Conclusion

In conclusion, MNR18ERAPJ821 is a type of resistor network that can be used for a variety of applications, such as voltage regulation, current control, feedback signals, switched power supplies, and damping in motor control circuits. The principle behind its operation is fairly simple, as it is a network of resistors connected in series and parallel that controls the current or voltage of a device or circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description