MOV-07D241KTR Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressors) devices, also known as varistors (or MOVs - Metal Oxide Varistors), are electrical components used to protect electronic circuits or systems from high-voltage surges or spikes, usually due to lightning strikes or other sources of transients. The MOV-07D241KTR is a TVS device designed for use in low-power, low-voltage circuit protection applications.

The MOV-07D241KTR is designed for use in a variety of applications, including industrial systems, telecommunications circuits, computers, and automobile electronics. It is rated for 15kV peak pulse power (Ipp) over a 10/1000μs waveform and is suitable for use in systems powered by voltages up to 7.5V. The device is constructed of an insulation layer of epoxy, a ceramic disk, and a metal-oxide layer.

The MOV-07D241KTR is designed to operate in the reverse biasing condition, meaning that it is placed in series with the protected circuit in the reverse direction, so that it will receive the electrical surge or spike before the protected circuit. When a transient voltage is applied, the MOV-07D241KTR will quickly absorb the energy and then dissipate it as heat. The amount of energy that can be absorbed (Ipp) is determined by the component\'s design and it should always be greater than the energy of the incoming pulse.

The MOV-07D241KTR is designed for fast response to transients and will protect the connected circuitry from incoming pulse waves up to 15kV peak rating. The device has a clamping voltage of 10V, which is the voltage that the device will limit the pulse wave to, providing the maximum possible protection to the device. As the transient voltage increases, the MOV-07D241KTR will begin to absorb the energy and dissipate it as heat, helping to protect the connected circuit. The maximum operating temperature is specified at 105°C.

The MOV-07D241KTR is a small, easy to mount component that can be incorporated into a circuit to provide reliable and effective transient protection. The device is typically connected in series with the protected circuit, so that it receives the pulse wave before the protected circuit. This allows the device to absorb the excessive energy, dissipating it as heat while providing the necessary protection to the connected circuit.

In summary, the MOV-07D241KTR is a TVS device designed for use in low-power, low-voltage circuit protection applications. It is rated for 15kV peak pulse power (Ipp) over a 10/1000μs waveform and is suitable for use in systems powered by voltages up to 7.5V. The device has a clamping voltage of 10V, the maximum operating temperature is 105°C, and it is typically connected in series with the protected circuit to provide reliable and effective transient protection.

The specific data is subject to PDF, and the above content is for reference