MOV-10D330K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MOV-10D330K is an over voltage and overcurrent protection device manufactured by Littelfuse, based on zinc oxide technology. It is a voltage-dependent resistor, known as a varistor, which is made up of various metals such as zinc oxide, cobalt, and manganese. It is a reliable protection component, providing safe and stable operation in AC and DC power circuits. It is mainly used for the protection of AC/DC systems, such as power supplies, DC motors, DC/DC converters, signal lines, and communication systems.

The MOV-10D330K is commonly used to protect against transient voltages and overcurrents. It has low-voltage and high-voltage detection thresholds, which enable the device to easily detect voltage changes and protect against potential damages. Moreover, the MOV-10D330K also has a nonlinear response, which results in reduced component losses and a greater amount of energy absorption. As such, it has higher surge current capacity compared to other varistors and MOVs.

In terms of working principle, it is noteworthy to mention that the MOV-10D330K is composed of various zinc oxide particles distributed in a ceramic matrix. When acting under normal levels, these particles display the property of nonlinear resistance, meaning that the resistance decreases as the voltage increases. This nonlinear behavior causes the component to limit the current flow and protect other components from the impact of over voltage or over current.

As the voltage rises, the particles of zinc oxide in the ceramic matrix get polarized, and begin to increase its resistance up to a certain peak. At this point, which is the highest level of protection of the MOV-10D330K, the capacitance is greatly reduced, causing an increase of the clamping voltage. This is key to its functionality, since this high clamping voltage will prevent the voltage surge from propagating to the other components in the circuit.

In summary, the MOV-10D330K is a highly reliable AC/DC protection component, which operates based on zinc oxide technology. It is widely used for the protection of AC/DC systems, due to its low-voltage and high-voltage detection thresholds, and its non-linear response, which results in higher surge current capacity compared to other varistors. Its working principle is based on the nonlinear electrical resistive behavior of zinc oxide and its capability to limit the current flow. As the voltage rises, its capacitance is greatly reduced, resulting in a higher clamping voltage that prevents the voltage surge from propagating to the other components in the circuit.

The specific data is subject to PDF, and the above content is for reference