MP-T-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Crimping, applying and pressing are three fundamental operations for product manufacturing and repair. Crimping is a type of metalworking that involves affixing a metal terminal or sleeve to the end of a wire or cable. It is used to join the two ends of a cable or wire and secure them from coming apart. There are many different types of crimp fittings that can be used depending on the application, including t-type, wedge-type, and ratcheting hand tools.

Application is the process of attaching an object to the surface of another object for a variety of reasons. It can be for decoration, structural support, insulation, electrical bonding or as a protective coating. The object that is applied to the other object is called the “applicator.” Common applicators include screws, bolts, rivets, pins, washers, brackets, nuts and rivets.

Pressing is a metal fabrication technique that applies uniform pressure over a specific area of a material. It is used to change the shape of the material and to make parts with specific dimensions. There are several types of presses that are used in metal working, such as the hydraulic press, mechanical press, and gap press.

MP-T-2 Application Field and Working Principle

The MP-T-2 is a type of crimper/applicator/press which is used for crimping, applying and pressing operations. It is a dual-stage, semi-automatic tool that can be used for a wide range of operations, including wire bundling, cable assembly and terminal crimping.

The MP-T-2 features a workbench with two working stages: the upper stage and the lower stage. The upper stage consists of a pair of pneumatic clamps that hold the workpiece in place while the lower stage features a crimping/applying head that can be adjusted to a specific radius. This allows the tool to accommodate a wide range of crimp sizes and types. The MP-T-2 also features an adjustable arm that can be used to apply pressure to a specific area of the workpiece.

The working principle of the MP-T-2 is quite simple. A workpiece is placed in the upper stage and held in place by the clamps. The lower stage is then adjusted to the specific radius of the crimp/apply and the arm is adjusted to apply a set amount of pressure to the workpiece. The tool then seals the crimp to the workpiece.

Conclusion

The MP-T-2 is a versatile tool that can be used for a variety of crimping, applying and pressing operations. It is a heavy-duty dual-stage semi-automatic tool that can perform a variety of different operations with ease. With its adjustable arm and crimping/applying head, the MP-T-2 is an excellent choice for any metalworking application.

The specific data is subject to PDF, and the above content is for reference