MP502-BP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A bridge rectifier is an electrical device made up of a network of four diodes, which allow current to flow in only one direction. The MP502-BP is a low-cost bridge rectifier that is widely used in a variety of applications, including converting AC to DC and providing a full-wave rectification of the input voltage.

In terms of its construction and operation, the MP502-BP consists of two diodes on each side, with the two inner diodes connected to the positive output and the two outer diodes connected to the negative output. When a positive voltage is applied to the circuit, the current flows through the outer two diodes and is outputted from the positive side, while the inner two diodes remain off. Conversely, when a negative voltage is applied, the current flows though the inner two diodes and is outputted from the negative side, while the outer two diodes remain off.

The MP502-BP bridge rectifier is a fast recovery, surface mounted device that operates with a maximum forward current of 8A and a maximum forward voltage of 700V. It also has a wide range of operating temperature, from -55°C to 150°C. In addition, the device is also capable of carrying up to 6A of reverse current and has a maximum reverse voltage of 800V.

The MP502-BP is highly versatile and can be used in a variety of applications, such as in AC to DC power supplies, motor control circuits, and switching power converters. It can also be used in AC power lines as a full-wave rectification system. Furthermore, it can be used as a bridge in a circuit that operates with a constant DC voltage, such as a battery charger.

In terms of how the rectifier operates, it works by converting the AC input voltage into a unidirectional DC voltage. It does this by allowing current to flow in only one direction and by changing the positive peaks of the AC voltage into negative. This is done by the two outer diodes which are connected to the positive output, as these will be conducting during the positive peaks of the AC voltage, while the inner two diodes are conducting during the negative peaks. This conversion is done rapidly, resulting in a smooth and continuous DC current.

The MP502-BP bridge rectifier is an efficient and reliable device that has a wide range of uses and applications. It is a low-cost solution that is reliable and suitable for many applications that require AC to DC conversion or full-wave rectification of the input voltage.

The specific data is subject to PDF, and the above content is for reference