Series:	Kool-Pak®MP900
Packaging:	Tube
Part Status:	Active
Resistance:	200 mOhms
Tolerance:	±1%
Power (Watts):	15W
Composition:	Thick Film
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	0/ +200ppm/°C
Operating Temperature:	-55°C ~ 150°C
Package / Case:	TO-126-2
Supplier Device Package:	TO-126
Size / Dimension:	0.320" L x 0.110" W (8.12mm x 2.79mm)
Height - Seated (Max):	0.450" (11.44mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors – MP915-0.20-1% Application Field and Working Principle

Through Hole Resistors (THRs) are one of the most common types of electronic components used in electronic circuits. These are also known as point-to-point or chip-mounted components and are usually found connected between two points in a circuit. They provide impedance or resistance to the flow of electricity in the circuit.Resistors can be used in numerous circuits to regulate or limit the current flow and control the voltage in a system. They are ideal for applications such as measuring circuits, controlling the flow of a particular current or voltage, and providing current-limiting protection devices.THRs come in a range of sizes, shapes and resistance ratings to accommodate different needs. The most common types of THRs are carbon-film, metal-film and metal-oxide-film resistors. The resistor\'s resistance range is determined by its design, material used and the specified environment it will be subjected to. The MP915-0.20-1% THRs are among the most popular and widely used THRs.The MP915-0.20-1% THRs have an accuracy of 1%. They are normally made of metal oxide film with resistance values ranging from 0.20 ohms to 0.60 ohms in 1% increments. Their capacitance is below 150pF for any given size. They have a compact and small body, making them ideal for use in small spaces and tight spaces.The primary application area for the MP915-0.20-1% THRs is for current limiting and high frequency applications. They are used in a wide variety of electronics circuit designs including audio amplifiers, circuits using resistive sensors, temperature measurement, process control systems, charge/discharge circuits, and other precision circuits.The working principle behind the MP915-0.20-1% THRs is based on Ohm\'s law. Ohm\'s law states that the current passing through a resistor is directly proportional to the voltage across the resistor. As the voltage across the resistor increases, the voltage and current will both increase.The design of the MP915-0.20-1% THRs is such that their resistance will not be affected by changes in ambient temperature. This allows them to maintain a stable and consistent resistance even under varying thermal conditions. The temperature coefficient of resistivity of the resistors is also very low, which means that their resistance will not change over time.The MP915-0.20-1% THRs are housed in an epoxy package and are designed with an open construction to allow for easy assembly and secure mounting. They are relatively small in size, meaning that they can be mounted in tight spaces and can tolerate high-temperature operation. They also have good mechanical strength, ensuring that they don\'t easily wear or tear over time.Overall, the MP915-0.20-1% THRs are among the most commonly used THRs and are ideal for a variety of applications. Their resistance is extremely accurate and stable, and their compact size allows them to be easily used in a range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description