MPA-179THTP0

Series:	--
Part Status:	Active
For Measuring:	Linear Position
Technology:	LVIT (Linear Variable Inductance Transducer)
Rotation Angle - Electrical, Mechanical:	--
Linear Range:	0 ~ 179.00mm (0 ~ 7.05")
Output:	0 V ~ 10 V
Output Signal:	--
Actuator Type:	Flexible Membrane - Linear
Linearity:	--
Resistance Tolerance:	--
Voltage - Supply:	15 V ~ 30 V
Mounting Type:	Chassis Mount
Termination Style:	Cable with Connector
Operating Temperature:	-20°C ~ 70°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Position Sensors - Angle, Linear Position Measuring

The MPA-179THTP0 is a position sensor that can measure both angle and linear position. This sensor utilizes a combination of optical, electrical, and mechanical components to accurately detect the position of an object or system. With its versatile design, the MPA-179THTP0 can be used to measure displacement in a wide variety of applications.The optical part of the MPA-179THTP0 consists of a light-emitting diode and a light-sensitive phototransistor. The phototransistor is mounted in a housing that contains the necessary optical filters to accurately measure the light traveling along a line. The light-emitting diode is located at one end of the line and the phototransistor is located at the other end. The distance between the two components is used to measure the angle or linear position of the object.The electrical components of the MPA-179THTP0 are used to convert the sensor’s optical output into an electrical signal that can be read by a logic device. The signal is typically provided as a digital output but can also be converted into an analog signal for use in other electronics. The sensor has a built-in voltage regulator which enables it to work with voltages ranging from 0 to 36 volts.The mechanical components of the sensor are used to adjust its sensitivity and resolution. The most important component is the cantilever beam, which is used to adjust the diameter of the optical path. The cantilever beam can be adjusted by hand in order to increase or decrease the sensitivity and resolution of the sensor. The cantilever can also be adjusted with a tool, such as a screwdriver, in order to fine-tune the sensitivity and resolution to match the application.The MPA-179THTP0 position sensor can be used in a wide variety of applications that require precise measurement of angle or linear position. This sensor is a great choice for measuring the position of a motor’s end-effector, the position of a piston in a linear actuator, or the angle of a rotating shaft. It can be used in industrial applications such as robotic arm control, 3D printing, and CNC machining. Additionally, the MPA-179THTP0 can be used in medical instruments, robotics, aerospace, and agriculture, among many other applications.In conclusion, the MPA-179THTP0 is a versatile, accurate, and reliable position sensor that can be used to measure angle or linear position with high precision. It is suitable for a variety of applications in both industrial and consumer markets. Its small form factor, low voltage requirements, and adjustable sensitivity and resolution make it a perfect choice for applications where precise, accurate measurements are required.

The specific data is subject to PDF, and the above content is for reference