MPMT10012502AT1 Resistors

Resistor-Ratio-Drift:	±2 ppm/°C
Height - Seated (Max):	0.040" (1.02mm)
Size / Dimension:	0.113" L x 0.051" W (2.86mm x 1.30mm)
Supplier Device Package:	SOT-23
Package / Case:	TO-236-3, SC-59, SOT-23-3
Mounting Type:	Surface Mount
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±25ppm/°C
Power Per Element:	100mW
Number of Pins:	3
Series:	MPM
Resistor Matching Ratio:	±0.05%
Number of Resistors:	2
Tolerance:	±0.1%
Resistance (Ohms):	1k, 25k
Circuit Type:	Voltage Divider
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Digi-Reel®

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MPMT10012502AT1 is a resistor network specially designed for signal attenuation and equalization of high-speed differential signals in electronic circuits. Its advantages include high attenuation accuracy, good thermal stability, and a low profile. The product is designed with a typical voltage rating of 50V and a power rating of 0.25W, with approximately 15Ω of resistance.Most resistors operate on the principle of Ohm\'s Law, which states that a small electric current will flow through a potential difference or "voltage drop" between two points in a conductor. Resistance is the measure of how efficiently a conductor opposes electric current. Thus, a resistor is an electrical component that intentionally introduces resistance into an electrical circuit in order to control the current flow and voltage levels in the circuit.In certain electronic components such as MPMT10012502AT1, several resistors are combined in an interconnecting network to form what is known as a resistor network. The resistor networks are designed for very specific applications such as equalizing the impedance of high speed differential signal paths. This involves equalizing the high-speed impedance of the two different signal paths. In order to achieve this, different resistors within the network are selected to form the required impedance across each signal path. The resistor networks serve to reduce signal bounce and crosstalk between signal lines by preventing any noise or shock generated on one line from traversing to another line.In addition to signal attenuation, resistor networks are also used for multichannel timing applications such as clock and reset drivers. The resistor network can be used to provide precise control of timing signals, delay control, and timing compensation for signal reception in advanced digital and mixed-signal designs.Besides the common signal attenuation and timing applications, the MPMT10012502AT1 resistor network may also be used in noise reduction circuits and lowpass filters. Low pass filters are used to reduce the amount of high frequency noise in a signal before it is amplified. Consequently, the resistor network is used to limit the high frequency components and improve the signal-to-noise ratio. By using low pass filters, an entire circuit can be kept free of interference.MPMT10012502AT1 is an ideal solution for any design which incorporates differential signal paths and seeks to control signal strength, attenuation, and crosstalk. It is a versatile device which allows for precise control, signal equalization, noise reduction, and low pass filtering. As such, it is well suited for applications in which differential signals are utilized and signal integrity is of great importance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description