Panel Indicators, Pilot Lights
MPR3PGTW12.0 is a panel mounted indicator designed for use in a wide range of industrial applications. It has a backlit display bar with four 12mm light elements. It is designed to operate with 12 Volt DC, 24 Volt DC, and 24 Volt AC power sources with up to 10 Watts of power. The indicator also features an external signal that can be routed to a remote switch or alarm. The indicator is designed for industrial environment, with a standard IP65 protection class rating.
Application Field
The main application field for the MPR3PGTW12.0 is to indicate the status of a process or equipment. This could be the level of a fluid in a level gauge, the pressure in a pressure sensing device, or the rotational speed of a motor. The indicator is designed to display a range of levels within the range of 0 - 10 volts or 0 - 10 pulses. The external signal can be used to indicate a warning, and to activate an alarm or other process.
Working Principle
The MPR3PGTW12.0 operates by receiving a signal from a controller or system. It then interprets this signal and turns the illumination on the three light elements (green, yellow, red) accordingly. Depending on the setting, the lights will be illuminated in sequence or combined simultaneously. When the external signal is received, the indicator will sound a warning and activate an alarm or other process according to the setting. The indicator can also be used in conjunction with a PLC (Programmable Logic Controller) to control the state of the lights.
Installation
Installation of the MPR3PGTW12.0 is straightforward. It can be mounted via the integral bracket or to any flat surface. The external signal can be connected to a terminal block located on the front of the indicator.
Maintenance
The indicator should be inspected periodically to ensure all connections are secure and that the indicator is functioning correctly. A regular calibration of the external signal is also recommended.
Conclusion
The MPR3PGTW12.0 is a reliable and versatile indicator, suitable for a wide range of industrial applications. The indicator features a backlit display bar and four 12mm light elements for easy viewing and an external signal for remote switching and alarms. The panel mounted indicator is easy to install and requires minimal maintenance, making it an ideal choice for any their IT system or industrial equipment.