MR9225X24B1+6-FSR

RPM:	4800 RPM
Lifetime @ Temp.:	--
Material - Blade:	Plastic
Material - Frame:	Plastic
Voltage Range:	--
Current Rating:	0.420A
Weight:	0.264 lb (119.75g)
Approvals:	CE, cUL, TUV, UL
Operating Temperature:	--
Ingress Protection:	--
Termination:	4 Wire Leads
Series:	MR9225
Noise:	53.0 dB(A)
Features:	Auto Restart, PWM Control, Speed Sensor (Tach)
Fan Type:	Tubeaxial
Bearing Type:	Ball
Static Pressure:	0.580 in H2O (144.5 Pa)
Air Flow:	107.0 CFM (3.00m³/min)
Width:	25.00mm
Size / Dimension:	Square - 92mm L x 92mm H
Voltage - Rated:	24VDC
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MR9225X24B1+6-FSR

MR9225X24B1+6-FSR is a DC fan developed by NMB Technologies Corporation. It has a high performance design that enables it to deliver efficient cooling performance in applications that require extremely high air flow. It also utilizes a special heat sink design that provides maximum cooling capability with minimal noise and vibration. This fan is ideal for applications where air flow needs to be maximized without creating excessive noise or vibration.

DC Fan Characteristics and Applications

DC fans are widely used in many applications, such as computers, servers, air conditioning systems, and exhaust systems. They are available in various sizes and configurations, ranging from small to large. The main characteristics of DC fans are their relatively small size, low noise level, high efficiency, and high power capability. DC fans are a reliable and economical alternative to traditional fan motors. These fans can be used in various applications where continuous operation is required. In applications where system volume or heat should be reduced, DC fans may be used to reduce fan speeds while still providing the same air flow.DC fans are typically classified as either powered (electric motor) or unpowered (mechanical) types. The powered type usually has a brushless motor, providing higher efficiency than mechanical types and minimizing the noise and vibration created by fan operation. In addition, powered fans typically offer higher performance than unpowered fans in terms of air flow.

MR9225X24B1+6-FSR Specifications

The MR9225X24B1+6-FSR is a high performance DC fan that is designed for applications requiring high air flow and minimal noise and vibration. It offers a rated airflow of up to 222.4 CFM and a maximum static pressure of 4.17mmH2O. The fan is designed to operate at or less than the rated current of 0.22A and a voltage range of 12VDC to 24VDC. The speed and airflow of the fan can be adjusted by varying the input voltage. The fan offers a MTBF of 50,000 hours at 40°C.

MR9225X24B1+6-FSR Application Fields and Working Principle

The MR9225X24B1+6-FSR is a DC fan that can be used in various applications, including computers, servers, air conditioning systems, and exhaust systems. It is designed to provide efficient cooling performance in applications where high air flow is required. The fan operates on a principle known as the Bernoulli principle, which states that an increase in the speed of a fluid causes a decrease in pressure. By increasing the fan speed, the air flow increases, creating a low-pressure area in the fan housing. This low-pressure area draws air into the housing, resulting in cooling. In summary, the MR9225X24B1+6-FSR is a DC fan designed to provide efficient cooling performance in applications requiring high air flow. It offers high power capability, low noise level, and high efficiency. The fan operates on the Bernoulli principle and can be adjusted to suit the application’s needs. The fan is ideal for systems that require continuous operation for extended periods of time.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description