MRF(1.6/5.6)-P-3C Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors are an important type of electrical connectors used in many industries. They are used in a wide range of applications, from broadcast and telecommunications systems to home and automotive applications. The MRF (1.6/5.6)-P-3C connector is an example of this type of connector and is used in many applications including broadcast TV systems.

A MRF (1.6/5.6)-P-3C connector is a type of radio-frequency (RF) coaxial cable connection used primarily in broadcast TV systems. The MRF (1.6/5.6) denotes the diameter of the cable jacket, and the P-3C denotes the type of connector used. This type of connector is designed to have both low loss and low noise qualities, and therefore is suitable for use in applications where minimal signal distortion is required. The cable used with this connector is usually a low-loss type such as CAT6 or RG-11.

The construction of the MRF (1.6/5.6)-P-3C connector is quite simple. It consists of a center conductor, an insulating sheath insulation and a tinned copper shield. The center conductor is typically a copper or silver-plated copper wire, and the insulating sheath is usually made from either PVC or polyethylene. The shield is commonly either tinned copper braid or aluminum foil. This construction gives the MRF (1.6/5.6)-P-3C connector excellent shielding qualities, which is important to reduce the amount of noise that enters the system.

The MRF (1.6/5.6)-P-3C connector is most often used in broadcast TV systems for connecting equipment to receive and transmit signals from antennas. It is also commonly used in home entertainment systems, where it is used to connect components such as DVD players, DVD recorders, set-top boxes, etc. The connector is also used in car audio systems to connect car audio amplifiers and car stereos.

The working principle of the MRF (1.6/5.6)-P-3C connector is fairly straightforward. The center conductor is typically connected to the antenna, while the shield is connected to the ground. When a signal is sent from the antenna, it passes through the center conductor and is then shielded from interference from outside sources. The signal then passes through the insulating sheath and is shielded from any other signals that may be present.

The MRF (1.6/5.6)-P-3C connector is an excellent choice of connector for many applications. It is durable, reliable, and provides excellent shielding. It is also easy to install and requires minimal maintenance. Because of these features, it is a popular choice for both radiofrequency and general electrical applications.

The specific data is subject to PDF, and the above content is for reference