MRS25000C1210FCT00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are important components in electricity and electronics, as they are used to limit excessive current. They are cost effective, reliable, and are available in a range of sizes, temperature coefficients, and tolerances. It is necessary to understand the role they play in an electrical circuit for the proper usage of these components.The MRS25000C1210FCT00 is a through hole resistor with a power rating of 250 W and resistance factor of 0.12 Ohms. It has a rated operating temperature range of -55 degrees Celsius to +155 degrees Celsius and a tolerance of 10 per cent. It comes in a 1210 size package. This through hole resistor has a coated surface to provide protection against attack from aggressive atmospheres and environmental factors.The application field for this type of through hole resistor is in the industrial sector where it can be used for controlling the current levels in electrical circuits. It is also suitable for applications in the automotive and telecom industries. Its working principle is that it simply limits the current in the circuit, reducing power loss and providing protection to the components. When the MRS25000C1210FCT00 is used in a circuit, it will act as a current converter, converting high current levels to low current levels thus protecting other components from excessive current.To be able to use the MRS25000C1210FCT00 effectively, it is important to understand the limitations of its capacity. IEEE regulations specify that the resistance factors should be less than 0.02 Ohms to be considered a good quality resistor, meaning that the MRS25000C1210FCT00 is overqualified for most applications. Additionally, the tolerance of the resistor should be considered in order to calculate the total resistance of the circuit accurately.In order to install the MRS25000C1210FCT00, the following steps should be taken:First, the circuit board must be prepared for the installation of the through hole resistor by measuring and drilling the required holes. Next, the through hole resistor should be placed and soldered on the circuit board according to the manufacturer’s instructions. Afterwards, the solder should be inspected to ensure a secure connection. Finally, the circuit board should be properly tested before being used.Using through hole resistors is an integral part of any electrical circuit. The MRS25000C1210FCT00 is a high quality through hole resistor which is suitable for use in various industrial, automotive, and telecom applications. Its working principle is simple and consists of reducing current levels to ensure the safety and efficiency of components. When utilizing through through hole resistors such as the MRS25000C1210FCT00, it is important to be aware of their limitations and accurately measure and install them to prevent any damage to other components in the circuit.

The specific data is subject to PDF, and the above content is for reference