MRS25000C2400FRP00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole resistors are a type of resistor that are designed for through-hole deployment and storage. When a through-hole resistor is used, the entire device is stored in a hole with a diameter of .25 mm or more. The physical size of the device should be in the general range of 5-25 mm long with a diameter of 2-8 mm, depending on the device type and application for which it will be used. The through-hole resistor type can be divided into two general categories, discrete- and chip type.

MR25000C2400FRP00 is a through hole resistor. It is a 24-ohm 1/4-watt resistor with a 25V maximum voltage rating. It is available in the form of an axial leaded through-hole resistor a single element with a linear resistance from zero ohms to 24 ohms and from one watt or less. It is also specialized for use with high-frequency applications.

The application of MR25000C2400FRP00 depende on the device purpose. It can be used for signal processing in frequency filters and oscillatory circuits because of its reasonable precision coefficient, stability and insulation level. It can also provide supplemental protection to power components such as diodes, transistors, and rectifiers in a variety of circuits. The MR25000C2400FRP00 is an appropriate choice for general-purpose applications because of its increased stability and resistance to vibration.

The working principle of the MR25000C2400FRP00 is simple. It is based on the Newton\'s law of cooling and the Joule-Thomson effect. That is, when it heats up, it will reduce its resistance. This resistance change is caused by a combination of thermal rolling and mechanical rolling. Thermal rolling occurs on the internal surface of the resistor, as heat is conducted up the walls of the resistor; and mechanical rolling occurs on the external surface of the resistor, as it rolls against the walls of the hole. As the temperature of the resistor increases, its resistance decreases. This is known as the Hot Resistance Concept.

The MR25000C2400FRP00 is a very reliable through-hole resistor. It provides superior accuracy and excellent resistance stability for a wide variety of electronic applications. It can be used in high-frequency applications such as filters, with very reliable results. The Hot Resistance Concept makes this type of resistor very useful in temperature-controlled applications, where accuracy and reliability are highly important.

The specific data is subject to PDF, and the above content is for reference