MRS25000C2743FC100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are electrical components used for limiting the current in a circuit or an individual device. This type of resistors are usually cylindrical and has two or more wire leads, hence have the capacity to better stand against physical vibrations. The MRS25000C2743FC100 is an example of through-hole resistors.

The MRS25000C2743FC100 resistor is a Axial-lead (through-hole) resistor with a power rating of 5 watts. The resistor is usually rated with a 25k ohms at ± 100ppm /°C. It is a non-inductive type with 6-pin configuration. The device features a wide resistance range, low power rating and accuracy of 0.1%.

The MRS25000C2743FC100 resistor has an insulation temperature rating of 155 °C. Common applications of this resistor type include circuit protection, voltage divider, power dissipater, pre-charging of capacitors, motor control, signal processing and pulse shaping.

The resistor features a small body size which can easily fit into tighter places. It also provides superior performance in terms of accuracy, stability, and reliability. The rated thermal resistance of the resistor is 1.9 °C/W, which makes it suitable for power dissipation in high-density equipment or applications. Furthermore, the capacitor has a functional life rating of 1000 hours.

The MRS25000C2743FC100 resistor can be connected in 12 different configurations in which the three most popular configurations are Axial-lead, Radial-lead and Butt-joint lead. The resistor can be connected in series or in parallel depending on the type of circuit. The resistance of this type of resistor is determined by its length.

The working principle of this resistor is based on an electrical phenomenon known as Joule heating. This phenomenon causes an increase in the temperature of a conductor when a current passes through it, thereby dissipating energy in the form of heat. The MRS25000C2743FC100 resistor works by limiting the current through the resistor and then releasing the energy in the form of heat energy. It is important to note that this resistor should not be used for high currents as it can burn out the current carrying wires.

In conclusion, the MRS25000C2743FC100 resistor is an example of through-hole resistors with a wide range of applications. It features a low power rating, small body size and superior performance in terms of accuracy, reliability and stability. The resistor works on the principle of Joule heating which limits the current through the resistor and releases the energy in the form of heat energy.

The specific data is subject to PDF, and the above content is for reference