MS75083-2SH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components used in electrical circuits to create self-induction, which is the creation of an electromotive force across the coil due to its own changing current. Fixed inductors, or RF inductors, come in a variety of configurations, and one example is the MS75083-2SH. This type of fixed inductor has an application field and working principle that are important to understand for its optimal use.

MS75083-2SH Application Field

The MS75083-2SH can be used for electrical circuits where low DC resistance is critical, such as communication circuits in mobile phones and other wireless communication devices, switched mode power supplies, low power motors, and sensors. This type of inductor has a higher allowable current than many inductors used in consumer electronic applications, and it can be used with power sources between 6 volts and 60 volts. The MS75083-2SH can also be used in RF applications such as audio filters and cellular base station power amplifiers. In addition, it can be used in TV antennas, FM radio antennas, and other applications where low frequency noise reduction is needed.

MS75083-2SH Working Principle

The MS75083-2SH is an axial leaded, surface mount inductor. It is constructed from winding a number of turns of insulated copper wire around a ferrite core. The inductor is coded with a two-digit numerical identification code which identifies the nominal inductance value of the inductor. The inductor has a self-resonant frequency of 17.9MHz. It also has a rated current of 1.63A, a rated voltage of 7.08.V, an operating temperature of -25 to +85°C, and a low DC resistance of 0.0036Ω.

The basic purpose of the MS75083-2SH is to reduce the current in the circuit in which it is placed. This is achieved by introducing a magnetic field which counteracts the electric current in the circuit, resulting in a decrease in current. This effect is proportional to the size of the inductor and is decreased if the inductance of the inductor is decreased or the current is increased. The MS75083-2SH can also be used in amplifier circuits to reduce impedance and increase the capacity of the amplifier.

The MS75083-2SH can also be used for filtering purposes where it is used to increase the amount of reactance to high frequency signals, thus filtering out any unwanted noise at high frequencies, and allowing only desired frequencies through. Additionally, it can be used as an LC filter circuit, where it is combined with capacitors to make amplifiers more efficient and reduce power consumption. Finally, it can be used as a choke to limit the current in a circuit and ensure the protection of the circuit.

Conclusion

The MS75083-2SH is an axial leaded, surface mount fixed inductor that has a variety of applications and working principles. It can be used in communication circuits, switched mode power supplies, low power motors, and RF applications. It has a two-digit numerical identification code which identifies the nominal inductance value, a self-resonant frequency of 17.9MHz, a rated current and voltage, and an operating temperature. It can also be used for filtering, as an LC filter circuit, or as a choke.

The specific data is subject to PDF, and the above content is for reference