MTMM-110-06-L-S-285

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular connectors are often necessary components for connecting different electronic devices, such as computers, printers, and other peripherals. The MTMM-110-06-L-S-285 is an example of a male pin header which suitable for such connections. This article will look at the application field and working principle of this male pin header.

Application Field of MTMM-110-06-L-S-285

The MTMM-110-06-L-S-285 male pin header is designed to be used in the purpose of connection or signal exchange between two electronic devices. Generally speaking, the angle of its male pin is 90 degrees, which makes it suitable for use in circuit boards, panel cutouts, wire harnesses, and plugs or jacks. The MTMM-110-06-L-S-285 is a 5mm pitch header with 110 single copper alloy pins, and 6.5A current per contact.

Ideal applications for the MTMM-110-06-L-S-285 male pin header include a variety of different electronic and telecom applications such as computers, printers, peripherals, serial communication, networking equipment, radio transmitters, and antenna devices. In addition, due to its high current rating and flexible design, the MTMM-110-06-L-S-285 is also used widely in industrial control and wireless communication systems.

Working Principle of MTMM-110-06-L-S-285

The working principle of the MTMM-110-06-L-S-285 male pin header is as follows: the male pin header is in the form of a small cable with one end being the tip and the other the base. Each individual pin in the header is connected to a copper alloy pin, which in turn transmits the current between two devices. The signal is then passed from one device to another via the copper alloy pin, with the rate being determined by the length of the copper alloy pin. In addition, a corresponding female socket is also used to complete the connection.

In order to achieve a perfect connection between the two devices, the tip of the male pin should be connected with a good contact area and make sure there is no electrical leakage. Special consideration should be taken to make sure the correct mating combination is being used when connecting the two devices. For example, the length of the copper alloy pin should match the width of the female socket.

It is important to note that the MTMM-110-06-L-S-285 is designed to be used only in environments that have a safe working temperature of -40 to +125 degrees Celsius and a voltage of a maximum of 1KV. In addition, the MTMM-110-06-L-S-285 male pin header should only be used with cables that are rated to 1KV. Using it with cables that are rated to higher voltage could lead to damaging of the pins and may cause a fire hazard or other electrical hazards.

Conclusion

In conclusion, the MTMM-110-06-L-S-285 male pin header is a flexible and reliable rectangular connector which is suitable for a variety of applications. It offers a wide array of electrical characteristics, including a high current rating and an optimal number of pins. Furthermore, its 90 degree angle makes it ideal for use in circuit boards, panel cutouts, and other components. Finally, it is important to note that its use should only be done within a safe temperature range depending on the material being used to avoid damaging the pins and also avoid potential fire hazards.

The specific data is subject to PDF, and the above content is for reference