MTSW-116-09-L-D-400

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MTSW-116-09-L-D-400 is a rectangular connector typically classified as part of the headers, male pins category. This type of connector is used most often when a strong electrical connection between two points is needed - typically, they will be used in instances where a signal connection is required, such as for communications cables in which information is transferred from one end to the other.

The standard MTSW-116-09-L-D-400 connector consists of two separable parts - the male and female connectors that are linked together. The male half of the connector has an outside diameter of 0.09 inches (2.29mm) with an inside diameter of 0.034 inches (0.86mm) and a height of 0.400 inches (10.16mm). The female connector has an outside diameter of 0.09 inches (2.29mm) with an inside diameter of 0.037 inches (0.94mm) and a height of 0.400 inches (10.16mm).

The connectors are connected together with a set of small pins located note the side of the connectors, typically known as male pins. These pins are designed to make complete contact with the female connectors when inserted and locked in place. The connecting system used by the MTSW-116-09-L-D-400 is known as a self-aligning system which allows the pins to be locked in place without the need for additional alignment components.

The MTSW-116-09-L-D-400 connector is designed to be robust and durable enough for frequent and long-term usage. As such, they are used in a range of applications - from automotive systems, to industrial robots, to communications networks. The connectors can be used in a variety of applications where the strong electrical connection and durability is preferred.

The MTSW-116-09-L-D-400 connector is designed to operate without any need for additional alignment components and is capable of reliably transmitting digital signals at high speeds. The majority of the connectors are designed to be used with a wide range of electrical power, ranging from 5V to 25V. The design features a built-in protection system which limits the amount of current that is allowed to pass through the terminals at any given time.

When connected, the pins which link the connectors together conduct the electrical charge from one end to the other. This current then passes through the device’s circuitry before leaving the connector and travelling to its destination. The connectors also have the capability to resist short circuits and external noise, limiting the chances of any electrical interference or damage.

The MTSW-116-09-L-D-400 is a particularly popular and widely used connector, as it combines cost-efficiency, durability and reliability in a small and easy-to-install form factor. It has been tested and proven to be suitable for use in a wide range of M2M and IoT systems, and is available in a variety of sizes and specifications to suit any application.

The specific data is subject to PDF, and the above content is for reference