MX7534KP+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital-to-analog converters (DACs) are electronic circuits used to convert digital information into analog signals. The MX7534KP+T is designed for applications in data acquisition, drives and controllers, and power supplies. It is a single-bit DAC with 8-bit resolution and a nominal switching rate of 140 KHz.

The MX7534KP+T features a bi-directional input port with two toggle control lines, allowing it to be configured as a synchronous input device. It has a signal gain of 0.12 V/V and is capable of driving both AC and DC loads. The single-bit design minimizes complexity by eliminating the need for multi-bit switch resolution. The wide up-time and low power dissipation make it ideal for low power applications.

The device operates by converting digital signals from a microcontroller into an analog output. A control signal enables or disables the output of the analog signal, allowing the user to select the level of resolution. The input of the digital signal is passed through a digital-to-analog converter to create an analog voltage output. The digital signal is held in a capacitive latch and is converted to an analog signal by comparing the digital signal against a reference voltage. The accuracy of the converted signal is dependent on the accuracy of the reference voltage.

The output of the device is a single-ended analog signal, which is suitable for driving AC loads. It also features low power consumption, making it ideal for applications requiring power efficiency. The circuit operates at a low voltage, making it well suited for applications requiring maximum noise control. The circuit features a wide dynamic range, making it well suited for high-resolution signal conversion.

The output of the signal is amplified before it is sent to a load, allowing for increased frequency response. In addition, the device includes a hysteresis function which allows for improved signal to noise ratio. The device also supports data rate adjustment, allowing for the adaptation to different signal formats.

The device is designed for applications requiring digital signal conversion. It is ideal for instruments and control systems. It is suitable for use in data acquisition, drives and controllers, and power supplies.

The specific data is subject to PDF, and the above content is for reference