MXO45HST-3C-10M0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators produce a periodic waveform over a range of frequencies. The most common oscillator is the LC (Inductance–Capacitance) oscillator, which uses an inductor (coil) and a capacitor to create a sinusoidal waveform. However, there are several other types of oscillators available, such as the MXO45HST-3C-10M0000 oscillator. This article will discuss the application field and working principle of the MXO45HST-3C-10M0000 oscillator.

The MXO45HST-3C-10M0000 oscillator is a type of surface-mount oscillator that is suitable for use in automated manufacturing systems. It operates on a frequency range of 3.3MHz to 10.0MHz and has tight frequency stability over the entire range. The output power is rated at 3.3V and the drive impedance is 25Ω. It also has excellent phase-noise performance, with low integral-phase and harmonic-phase noise. Additionally, it has a lower power supply operating voltage of 2.2V, making it suitable for low-power applications.

In terms of applications, the MXO45HST-3C-10M0000 oscillator is suitable for use in industrial applications, due to its low power consumption and high frequency stability. It can also be used in medical applications such as ultrasound scanners, laser printers and scanners. The device is also suitable for use in communication and data systems due to its excellent phase-noise performance. Additionally, it can be used in consumer applications such as DVD players, digital cameras and mobile phones.

The working principle of the MXO45HST-3C-10M0000 oscillator is based on the LC (Inductance–Capacitance) oscillator concept. The oscillator consists of an inductor, a capacitor, and a transistor. The inductor and the capacitor form an LC tank, which is connected in parallel to the collector-emitter circuit of the transistor. When a voltage is applied, the capacitor charges and the inductor\'s current increases. This creates a positive feedback loop, which causes the frequency of the oscillator to increase.

The frequency of the oscillator can be tuned by adjusting the capacitance or inductance of the tank. Furthermore, the amplifying effect of the transistor can be used to increase the output power. Additionally, the device can be used in a single-ended form or in a push-pull configuration, which improves its linearity and reduces distortion.

In conclusion, the MXO45HST-3C-10M0000 oscillator is a type of surface-mount oscillator that is suitable for use in automated manufacturing systems. It has excellent phase-noise performance and a wide frequency range. The device can be used in industrial, medical, communication, data systems and consumer applications. Its working principle is based on the LC (Inductance–Capacitance) oscillator concept, while its frequency can be adjusted by changing the capacitance or inductance of the tank.

The specific data is subject to PDF, and the above content is for reference