Allicdata Part #: | NA-10M-2400-ND |
Manufacturer Part#: |
NA-10M-2400 |
Price: | $ 77.96 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Taitien |
Short Description: | OSC OCXO 10.0000MHZ LVTTL DIP |
More Detail: | 10MHz OCXO LVTTL Oscillator 5V 6-DIP (0.750", 19.... |
DataSheet: | NA-10M-2400 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 70.16170 |
Series: | NA-10M-2400 |
Packaging: | Bulk |
Part Status: | Active |
Base Resonator: | Crystal |
Type: | OCXO |
Frequency: | 10MHz |
Function: | -- |
Output: | LVTTL |
Voltage - Supply: | 5V |
Frequency Stability: | ±3ppb |
Operating Temperature: | -30°C ~ 70°C |
Current - Supply (Max): | 800mA |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | 6-DIP (0.750", 19.05mm), 5 Leads |
Size / Dimension: | 1.015" L x 1.015" W (25.78mm x 25.78mm) |
Height - Seated (Max): | 0.500" (12.70mm) |
Current - Supply (Disable) (Max): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators can be found in many areas of electronics, and one of the most widely used is the NA-10M-2400. This oscillator is designed for use in a wide variety of applications and can be used to satisfy the high performance requirements of today’s demanding electronics.
The NA-10M-2400 oscillator is typically used in applications that require a wide frequency range, or for maintaining steady and consistent timing signals. Some of its common applications are in communications systems, ranging from cellular phones to radio transmitters, networking systems, military communications, and more. Additionally, it can be used in the automotive industry for vehicle infotainment systems, audio equipment, and digital displays as well as in medical applications for monitoring and diagnostic equipment.
The working principle of the NA-10M-2400 oscillator is based on the use of a quartz crystal. The crystal is designed to vibrate or resonate at a frequency determined by its size and cut. The resonance frequency is typically in the range of 10 MHz to 24 MHz. This frequency is then used to create an electrical signal. This signal is then connected to the circuit, which includes a power supply, an amplifier, and a tuning circuit, to drive the crystal to oscillate at the desired frequency.
The power supply is responsible for supplying the proper voltage and current to the amplifier, while the amplifier is capable of providing an amplified signal to the circuit. The tuning circuit is then used to adjust the frequency of oscillation. This is done by changing the capacitance or inductance of the circuit, which in turn affects the output frequency.
The NA-10M-2400 oscillator is capable of achieving a frequency stability of less than 0.04ppm/C. Additionally, it can support a wide range of temperatures and humidity, making it suitable for use in harsh environments. It also features protection against electromagnetic interference, significantly reducing the noise and interference in the signal output.
To ensure high performance, the NA-10M-2400 oscillator is designed to meet the operating requirements of a wide variety of applications, making it the perfect choice for today\'s demanding electronics. Its high performance, wide range of frequencies, and wide temperature range make it an ideal choice for applications where precision timing is required.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...