Allicdata Part #: | 1664-1013-ND |
Manufacturer Part#: |
NA-10M-2502 |
Price: | $ 54.96 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Taitien |
Short Description: | OSC OCXO 10MHZ 5V SW DIP |
More Detail: | 10MHz OCXO Sine Wave Oscillator 5V 6-DIP (0.750",... |
DataSheet: | NA-10M-2502 Datasheet/PDF |
Quantity: | 6 |
1 +: | $ 49.96530 |
10 +: | $ 48.18110 |
50 +: | $ 47.46710 |
100 +: | $ 44.61190 |
Frequency Stability: | ±10ppb |
Current - Supply (Disable) (Max): | -- |
Height - Seated (Max): | 0.500" (12.70mm) |
Size / Dimension: | 1.015" L x 1.015" W (25.78mm x 25.78mm) |
Package / Case: | 6-DIP (0.750", 19.05mm), 5 Leads |
Mounting Type: | Through Hole |
Ratings: | -- |
Current - Supply (Max): | 800mA |
Operating Temperature: | -30°C ~ 70°C |
Series: | NA-10M-2500 |
Voltage - Supply: | 5V |
Output: | Sine Wave |
Function: | -- |
Frequency: | 10MHz |
Type: | OCXO |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are electric devices that generate periodic voltage signals in a circuit. They are widely used in a variety of electrical and electronic circuits, such as in computers, electronics, telecommunications, and instrumentation. The NA-10M-2502 is an oscillator device designed for use in industrial environments. It is a high frequency, low-noise, high-stability oscillator.
The NA-10M-2502 is designed for applications that require precise frequency stability with low jitter. It has a frequency range of 250 kHz – 10 MHzand can deliver ±2.5 V peak-to-peak sine, triangle or square waveforms. Its low-noise characteristics make it a good choice for applications that require low-noise operation, such as ultrasound imaging or low-noise signal measurement.
The NA-10M-2502 also offers high accuracy over temperature, with temperature drift as low as 0.1 ppm/°C. This makes it a good choice for applications that require precise frequency measurement over long periods of time and over a significant temperature range. Additionally, it has a fast start-up time from power-down of only 15 microseconds. This contributes to its suitability for applications such as communications or instrumentation.
The working principle of the NA-10M-2502 is based on a Pierce Oscillator topology. This topology uses an inverting amplifier, a tuned tank circuit, and a voltage-controlled capacitance. The amplifier\'s gain is adjusted to the point where it is just enough to smoothly sustain oscillations within the tuned tank. The oscillating frequency is determined by the value of the tank circuit inductor and capacitor, as well as by the input and output impedances. The oscillator circuit is generally provided with a gain-control input and an output in order to allow the frequency to be precisely adjusted.
The NA-10M-2502 is a versatile oscillator device capable of operating in a wide range of applications. Its low-noise properties and high-stability frequency make it suitable for a variety of industrial and commercial applications. Its fast start-up time means that it can be used in applications that require rapid start-up, such as communications or instrumentation. In combination with its wide frequency range and exceptional accuracy over temperature, the NA-10M-2502 is a valuable tool for engineers in industrial and commercial applications.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...