Allicdata Part #: | 1664-1014-ND |
Manufacturer Part#: |
NA-10M-2503 |
Price: | $ 65.37 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Taitien |
Short Description: | OSC OCXO 10MHZ 5V SW DIP |
More Detail: | 10MHz OCXO Sine Wave Oscillator 5V 6-DIP (0.750",... |
DataSheet: | NA-10M-2503 Datasheet/PDF |
Quantity: | 18 |
1 +: | $ 59.42790 |
10 +: | $ 57.30670 |
50 +: | $ 56.45770 |
100 +: | $ 53.06170 |
Frequency Stability: | ±3ppb |
Current - Supply (Disable) (Max): | -- |
Height - Seated (Max): | 0.500" (12.70mm) |
Size / Dimension: | 1.015" L x 1.015" W (25.78mm x 25.78mm) |
Package / Case: | 6-DIP (0.750", 19.05mm), 5 Leads |
Mounting Type: | Through Hole |
Ratings: | -- |
Current - Supply (Max): | 800mA |
Operating Temperature: | -40°C ~ 85°C |
Series: | NA-10M-2500 |
Voltage - Supply: | 5V |
Output: | Sine Wave |
Function: | -- |
Frequency: | 10MHz |
Type: | OCXO |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are electronic circuits whose output is a periodic waveform, most of which are based on the use of feedback in active filtering or voltage supply networks, or in combination with active devices such as transistors or vacuum tubes. Oscillators are used in many applications such as in radio transmitters and receivers, in modems, in microprocessors, and in computers.
One type of oscillator is the NA-10M-2503, which is designed to provide reliable performances and stability under extreme temperatures and environmental conditions. It features a wide working range, which enables it to operate in temperatures ranging from -20 to 70 °C and can operate for extended periods with maximum performance within this range. It also has a voltage range of 12V to 27V and can handle a variety of signals.
The NA-10M-2503 oscillator works on the principle of Use of an active filter network. The active filter is created using two identical resistors in series with an inductor followed by a capacitor. This arrangement of components creates a band pass filter, which helps to shape the final output signal.
The active filter also incorporates an amplifying stage in order to boost the signal sent into it. This amplifying stage requires a power source, and in the case of the NA-10M-2503 this is a 9V battery. The battery provides power to the operational amplifiers in the active filter which give the output signal the necessary boost to reach its desired level.
Another feature of the NA-10M-2503 oscillator is its low output jitter. Jitter is an undesirable form of noise which can appear in the output signal and cause it to be unreliable. The NA-10M-2503 has measures in place to reduce the amount of jitter in the output signal, such as the addition of a dampening capacitor in the active filter.
The NA-10M-2503 oscillator is used in a variety of applications, such as in radio communication systems, in digital meters, in sound recorders, and in TV sets. It is also used in microprocessor systems to control peripheral devices such as the floppy disk drive or the fan speed.
The NA-10M-2503 oscillator uses the principle of an active filter network combined with an amplifying stage in order to create a reliable and stable output signal. This oscillator is used in many applications, and in particular in digital systems where its low output jitter helps to ensure a reliable signal.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...