Allicdata Part #: | NA-10M-2504-ND |
Manufacturer Part#: |
NA-10M-2504 |
Price: | $ 81.33 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Taitien |
Short Description: | OSC OCXO 10.0000MHZ SNWV DIP |
More Detail: | 10MHz OCXO Sine Wave Oscillator 5V 6-DIP (0.750",... |
DataSheet: | NA-10M-2504 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 73.19200 |
Series: | NA-10M-2500 |
Packaging: | Bulk |
Part Status: | Active |
Base Resonator: | Crystal |
Type: | OCXO |
Frequency: | 10MHz |
Function: | -- |
Output: | Sine Wave |
Voltage - Supply: | 5V |
Frequency Stability: | ±5ppb |
Operating Temperature: | -40°C ~ 85°C |
Current - Supply (Max): | 800mA |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | 6-DIP (0.750", 19.05mm), 5 Leads |
Size / Dimension: | 1.015" L x 1.015" W (25.78mm x 25.78mm) |
Height - Seated (Max): | 0.500" (12.70mm) |
Current - Supply (Disable) (Max): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are electrical circuits used for generating periodic electrical signals. The NA-10M-2504 oscillator is one such type of oscillator often used in a wide range of applications. This article will discuss the application field and the working principle of the NA-10M-2504 oscillator.
The NA-10M-2504 is a high-performance oscillator used for generating both simple and precise frequency signals up to 25 MHz. It is widely used in telecommunications, computers, digital logic and consumer electronics systems because of its small size, low noise performance, and high accuracy. It also offers reliable frequency stability over wide temperature ranges.
The most common applications for the NA-10M-2504 oscillator include televisions, radios, medical imaging equipment, instrumentation, GPS devices, cellular phones, and other communication devices. The oscillator is also used in military and aerospace applications, as well as in industrial control systems.
The working principle of the NA-10M-2504 oscillator is based on the concept of resonance. A frequency-controlled oscillator is used to generate a periodic signal of a certain frequency. This signal is then used to drive an oscillating circuit, which consists of inductors and capacitors connected in series. The resonant frequency of the circuit is then determined by the ratio between the inductive and capacitive reactance.
When a voltage signal is introduced to the circuit, current flows through the inductors, creating a magnetic field. At the same time, the capacitors allow a rapid discharge of the energy stored in the magnetic field. The result is a periodic signal that oscillates at the resonant frequency of the circuit.
The NA-10M-2504 oscillator is designed to produce a signal of a precise frequency with extremely low noise. It features an on-chip buffer circuit that suppresses noise to a very low level, thus ensuring reliable signal generation even in adverse conditions. The oscillator is also equipped with temperature compensation and frequency trimming, ensuring optimum performance at all times.
In conclusion, the NA-10M-2504 oscillator is a highly reliable and accurate electrical circuit used in a wide range of applications. It works on the principle of resonance and is designed to produce a signal with extremely low noise. It is widely used in a number of communication and consumer electronics systems and offers reliable frequency stability over wide temperature ranges.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...