Series:	NA-10M-6800
Packaging:	Bulk
Part Status:	Active
Base Resonator:	Crystal
Type:	OCXO
Frequency:	10MHz
Function:	--
Output:	Sine Wave
Voltage - Supply:	12V
Frequency Stability:	±10ppb
Operating Temperature:	-20°C ~ 70°C
Current - Supply (Max):	400mA
Ratings:	--
Mounting Type:	Through Hole
Package / Case:	6-DIP (0.750", 19.05mm), 5 Leads
Size / Dimension:	1.015" L x 1.015" W (25.78mm x 25.78mm)
Height - Seated (Max):	0.583" (14.80mm)
Current - Supply (Disable) (Max):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are systems or circuits that generate periodic electrical signals. Oscillators are used in a variety of applications such as electronic clocks, testing instruments, and automotive audio systems. The NA-10M-6837 oscillator is an example of a popular type of oscillator and is used in many devices. In this article, we will take a look at the application field and working principle of the NA-10M-6837 oscillator. The NA-10M-6837 is a two-transistor composite oscillator that is designed for low-cost and medium-power applications. It is optimized for low power consumption and is suitable for use in a wide variety of consumer and automotive electronics products. The oscillator is characterized by a high stability over supply voltage and temperature and requires no external components.The NA-10M-6837 oscillator has a wide range of applications, including telecommunications, computer networks, and data processing. It is also used in consumer electronics such as TV sets and hi-fi audio systems. The oscillator is suitable for use in automotive electronics, including driver information systems and vehicle tracking.The NA-10M-6837 oscillator operates under two distinct operating modes, namely frequency modulation (FM) and pulse width modulation (PWM). In frequency modulation, the output frequency of the oscillator is modulated by an input signal. The frequency range is typically linear and can range between 1 kHz and 5 MHz. In pulse width modulation, the output is also modulated, but the duty cycle is fixed at a predetermined value.The working principle of the NA-10M-6837 is quite simple. The oscillator contains two transistors connected in a multivibrator circuit. The circuit is powered by a single-ended power supply. The transistors are biased in such a way that one transistor is off and the other is on. The transistors alternate between the two states, thus producing a periodic square wave signal at the output. The frequency of the output signal is determined by the capacitors and resistors that are connected to the base of the transistors. The NA-10M-6837 oscillator can also be used as a voltage controlled oscillator (VCO). In this case, an external signal is applied to the base of the transistor controlling the oscillator frequency. This allows the oscillator frequency to be varied over a wide range, depending on the input voltage.In conclusion, the NA-10M-6837 oscillator is a popular choice for low-power low-cost applications. It is suitable for use in a variety of consumer electronics and automotive systems. The oscillator is capable of providing a highly stable output over a range of supply voltages and temperatures. The oscillator works on the principle of multivibrator circuit powered by a single-ended power supply. It can also be used as a voltage controlled oscillator for applications that require adjustable frequencies.

The specific data is subject to PDF, and the above content is for reference