Allicdata Part #: | NAC-10-681-DXE-ND |
Manufacturer Part#: |
NAC-10-681-DXE |
Price: | $ 23.93 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 10A DIN |
More Detail: | N/A |
DataSheet: | NAC-10-681-DXE Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 21.75390 |
Series: | NAC |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules
Power line filter modules are an essential element in protecting electronic systems from noise, interference, and voltage surges. The NAC-10-681-DXE is a power line filter module designed to provide protection against a wide range of electrical disturbances. This article will discuss the application field and working principle of the NAC-10-681-DXE power line filter module.
Application Field
The NAC-10-681-DXE power line filter module is designed to protect sensitive electronic circuitry from surge transients, radio frequency interference, and conducts fluctuations in voltage and current. It is ideal for use in audio/video systems, industrial environments, test equipment, and any other system susceptible to these types of interference and noise. The module is designed to be mounted preferably on a vertical plane-back board, although horizontal mounting is also possible.
Working Principle
The NAC-10-681-DXE power line filter module contains both capacitive and inductive elements. These elements are connected in a variety of ways to attenuate different types of noise and interference. The capacitive elements are connected in series with the power line and act as a high-frequency noise filter, while the inductor is connected in parallel with the power line to act as an interference filter. The combination of the two elements results in the effective reduction of noise, interference, voltage spikes, and other unwanted electrical disturbances.
The NAC-10-681-DXE power line filter module contains four capacitors, one for each line, and an inductor. The capacitors are connected in a comb-line configuration: two capacitors connected in series and an inductor in parallel with each. Each capacitor has a given capacitance value, and the inductor has a given inductance value. The component values are chosen to provide the desired level of attenuation. The module also contains a “bleeder” capacitor; this is an additional capacitor used to reduce the rise time of the capacitors and to prevent the module from developing a high voltage “backswing”.
The NAC-10-681-DXE power line filter module is designed to provide an effective level of protection against electrical interference and noise. The combination of the capacitive and inductive elements allow the module to attenuate high frequency noise and interference, while maintaining the original signal integrity. The module is used in a variety of applications to provide power line protection for sensitive electronic circuitry.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT