Allicdata Part #: | NAC-30-681-DXE-ND |
Manufacturer Part#: |
NAC-30-681-DXE |
Price: | $ 27.43 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 30A DIN |
More Detail: | N/A |
DataSheet: | NAC-30-681-DXE Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 24.93540 |
Series: | NAC |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 30A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
NAC-30-681-DXE is a type of power line filter modules. It is used to filter and eliminate noise interference from any AC power line that contains switching power supplies or other switching devices. It is designed to retain its performance and reliability under extreme temperature, voltage, and current conditions. With its fast response rate and low impedance, this module is ideal for industrial, commercial, and residential applications.
The NAC-30-681-DXE power line filter modules is ideal for applications where it is necessary to reduce transient noise radiating from its source and to prevent noise from propagating into the power line. It is made up of three stages of filters to provide maximum rejection of conducted and radiated emissions. The first stage filters created by the internal capacitors reduce the most severe transient events. These capacitors also provide the filtering needed from RFI (radio frequency interference) and EMI (electromagnetic interference). The second stage is a differential mode filter that reduces EMI and common mode voltages. The third stage is a common mode filter made with ferrite cores and capacitors. This last stage helps reduce common mode transient noise and lowers differential and common mode noise on the power line.
The operational principles behind the NAC-30-681-DXE power line filter modules are simple. A power line is typically composed of a voltage source and a load. The voltage source is typically a transformer connected to the AC mains or a DC power supply. The load, on the other hand, is composed of all the loads that are connected to the line, such as motors and other devices.
The NAC-30-681-DXE power line filter module works by intercepting the line current and diverting it to the filter and then to the loads. In doing so, it is designed to attenuate transients from both the source side and the load side. On the source side, the module sees a peak voltage (VP) and a low voltage (LSW) defined by the line to line differential, while on the load side it sees only the peak voltage (VP) of the line.
The NAC-30-681-DXE power line filter module also features a protection device that allows the filter to protect itself from changes in the supply voltage, as well as overvoltage and overcurent conditions. The protection device is also designed to reset automatically upon detection of a voltage or current reset condition.
In terms of applications, NAC-30-681-DXE power line filter modules are most commonly used in industrial, commercial and residential applications where it is necessary to attenuate transient noise and prevent noise propagation into the power line. It can also be employed in medical, aerospace and military applications where attenuation of noise is critical.
In conclusion, the NAC-30-681-DXE power line filter module is a highly advanced filtering device. It utilizes three stages of filters to provide maximum rejection of conducted and radiated emissions, while also featuring a protection device to protect it from environmental conditions. Its fast response rate and low impedance make it ideal for many applications where it is necessary to reduce transient noise and prevent noise propagation into the power line.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT