Allicdata Part #: | 1776-3268-ND |
Manufacturer Part#: |
NAH-06-332 |
Price: | $ 29.20 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 6A CHAS |
More Detail: | N/A |
DataSheet: | NAH-06-332 Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 26.54820 |
10 +: | $ 25.69460 |
25 +: | $ 24.83810 |
50 +: | $ 23.98160 |
100 +: | $ 23.12510 |
250 +: | $ 20.98390 |
Series: | NAH |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 6A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The NAH-06-332 Power Line Filter Module is an important piece of technology in various industrial applications. It is typically employed in power electronics such as AC or DC power circuits where power line harmonic distortion must be readily addressed. It comprises of three separate filter stages - EMI + ESD, Continuous Line and Transient Line - allowing it to block in both high and low frequency ranges. In addition, the filter can be tuned to a specific frequency in order to achieve maximum performance.The primary purpose of the NAH-06-332 Power Line Filter Module is to reduce the amount of electrical noise on a power line. This noise is usually caused by electrical appliances and other devices which operate on mains power. The module works by absorbing and dampening the high frequencies in the noise, which helps reduce its intensity and prevent interference with other equipment.
The EMI + ESD stage of the NAH-06-332 Power Line Filter Module is designed to protect the circuit against Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD). EMI is the emission of energy in the form of electromagnetic waves from a source, which can interfere with other electrical or electronic equipment. ESD is the build up of an electric charge on a surface, which can discharge and harm physical and/or electrical components. The EMI + ESD stage works by absorbing and reflecting any EMI or ESD signals away from the power line.
The Continuous Line stage is designed to attenuate the high frequency harmonics which are found in the noisy power line. The Continuous Line works by adding series inductors and capacitors to the line, which absorb and reflect any high frequency harmonics in the signal. This attenuates them, thereby reducing their intensity and helping to improve the overall signal quality.
The Transient Line stage of the NAH-06-332 Power Line Filter Module is designed to suppress transient signals on the power line. Transients are sudden spikes or drops in the voltage level on a power line, which can cause havoc with electronic equipment. The Transient Line works by adding series inductors and capacitors to the line, which absorb and reflect any transient signals which may appear on the power line.
The NAH-06-332 Power Line Filter Module can be tuned for specific frequencies in order to maximize the amount of attenuation which is achieved. This is achieved by adjusting the values of the inductors and capacitors which are used within the module. The frequency of the filter can also be adjusted in order to optimize the performance of the filter, for example, in order to reduce the amount of noise in a specific range, or to block signals that are in specific range.
In conclusion, the NAH-06-332 Power Line Filter Module is an important piece of technology which is used in various industrial applications. It is capable of reducing the amount of electrical noise on a power line, which helps improve the overall signal quality and prevents interference with other equipment. The module comprises of three separate filter stages - EMI + ESD, Continuous Line and Transient Line - which provide protection against high frequency harmonics, EMI and ESD, as well as transient signals. The module can also be tuned for specific frequencies in order to maximize the amount of attenuation.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT