Allicdata Part #: | 1776-2500-ND |
Manufacturer Part#: |
NAH-10-000 |
Price: | $ 30.15 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 10A CHAS |
More Detail: | N/A |
DataSheet: | NAH-10-000 Datasheet/PDF |
Quantity: | 4 |
1 +: | $ 27.41130 |
10 +: | $ 26.52610 |
25 +: | $ 25.64200 |
50 +: | $ 24.75770 |
100 +: | $ 23.87350 |
250 +: | $ 21.66300 |
Series: | NAH |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power line filter modules are a type of device used to filter out unwanted electrical noise generated from electronic, power, or communication lines. The NAH-10-000 application field and working principles is a specific type of power line filter module designed specifically for use in applications where high electrical noise immunity is required.
The NAH-10-000 power line filter consists of a broad-band inductive element (E-inductor) connected in series with a toroidal choke and high-current schottky rectifiers. This combination of components works together to provide an effective high-frequency noise isolator.
The inductive element works by blocking fast (high frequency) switching noises from entering the power line, while the choke helps to hold the current steady and prevent the noise from “coupling” back into the power line. The rectifiers are placed in parallel with the filter to provide a low-impedance connection to the noise source.
The NAH-10-000 also includes a number of other components such as a thermal fuse for over-temperature protection, an EMI/RFI filter to reduce the effects of radio frequency interference (RFI), and an optional filter to remove any harmonics that may be present on the power line. All of these components work together to provide a highly effective filter that allows only clean power to pass through.
The NAH-10-000 is designed to be used in applications with high ambient temperatures and high levels of interference. The filter can be installed in tight, confined spaces and is designed to withstand up to 35 Celsius degrees of permanent operation. It is also designed to minimize the chance of any damage due to over-temperature or over-current conditions.
The NAH-10-000 is available in a variety of form factors and can be mounted on a PCB or in a box, enclosure, or on the side of equipment. Additional features, such as current monitoring, pass-through connectors, ESD protection, and solid-state switches for switching noise, are available depending on the application.
The NAH-10-000 application field and working principles make it an ideal solution for applications requiring high levels of electrical noise suppression. Its combination of components, electrical properties, and features provide a highly effective, reliable, and easy to install power line filter module.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT