Allicdata Part #: | NAM-04-331-D-ND |
Manufacturer Part#: |
NAM-04-331-D |
Price: | $ 22.38 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 4A DIN |
More Detail: | N/A |
DataSheet: | NAM-04-331-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 20.34270 |
Series: | NAM |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 4A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules
Power line filter modules are used to filter out undesirable signals from an electrical power line, allowing only desirable signals to pass through. Such modules are used in many applications, from controlling lights and other electrical devices in a home, to providing input protection for sophisticated computer and electronic systems.
NAM-04-331-D is an example of a power line filter module. Its application field is primarily for filtering in AC power lines, while its working principle is one of series and parallel filters. It is designed to provide low insertion loss, and is suitable for use in any applications which require filtering of high frequencies, such as communication equipment, data equipment, and medical equipment.
The series filter of the NAM-04-331-D consists of two different coils, a first order filter and a second order filter. The first order filter is designed to remove unwanted signal noise, such as that caused by electromagnetic interference. It will also reject high frequency signals. The second order filter is designed to provide better harmonic suppression, and improve common mode rejection, specifically for frequencies between 1 kHz and 5 kHz.
The parallel filter works in a similar way to the series filter, and is designed to remove noise in the lower frequency range. In the case of the NAM-04-331-D, this filter is designed to reject frequencies between 10 Hz and 1 kHz. It is also designed to provide better common mode rejection at these frequencies. The parallel filter is also useful for providing power lines with a high degree of protection against overvoltage transients.
The main advantages of using the NAM-04-331-D power line filter module are its low insertion loss, its suitability for use in a range of applications, and its ability to provide superior harmonic suppression and common mode rejection. In addition, it is a relatively low cost filter module compared to other similar products on the market.
For applications where harmonic suppression and common mode rejection are important, the NAM-04-331-D power line filter module is an ideal choice. It is suitable for use in a variety of different applications, including communications and data equipment, medical devices, and other electrical equipment needing power line filtering and protection.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT