Allicdata Part #: | 1776-3313-ND |
Manufacturer Part#: |
NAM-10-471 |
Price: | $ 20.81 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 10A CHAS |
More Detail: | N/A |
DataSheet: | NAM-10-471 Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 18.91890 |
10 +: | $ 18.32920 |
25 +: | $ 17.73780 |
50 +: | $ 17.14640 |
100 +: | $ 16.55510 |
250 +: | $ 14.78130 |
Series: | NAM |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules are designed to reduce the interference on power transmission lines. NAM-10-471 is a device used for power transmission line protection and EMC filtering. As the name implies, NAM-10-471 is a small sized and low cost device which has a wide application on power systems.
This power line filter module is designed to provide protection and EMC filtering for power systems. The device is designed for high current applications and is capable to handle up to 10A of current in the input. It also features an overload protection circuit so that it can be used for both large and small current applications.
The NAM-10-471 filter module is designed with two layers of shielding. The first layer is a metal shield which covers the electrical components in the device while the second layer is an air gap that separates the electrical components from the signal paths. This air gap reduces the chances of interference and provides superior EMC protection. In addition, the first layer also serves as a thermal barrier, which increases the reliability of the device.
The other components inside the device are capacitors, resistors, and inductors. The capacitors, resistors, and inductors are designed to absorb and reject the harmful frequencies that can interfere with the power signals. The device is also designed to limit the level of overvoltage and current in the output signals.
The working principle of the filter module is based on the transfer of electrical energy from one point to another. The device converts the electrical energy into a low level of AC current which then passes through the capacitors, resistors, and inductors. The capacitors absorb the higher frequency harmonics and reject the lower frequency ones, while the resistors, inductors, and capacitors reject the low frequency harmonics. This filtering process reduces the amount of interference on the power line.
The NAM-10-471 filter module is designed to operate in both AC and DC circuits. In AC circuits, the module acts as a filter to reduce the level of interference. In DC circuits, the module helps to convert the AC current to the DC current. This conversion process is very important because it prevents the direct connection of the power signals to the ground.
The NAM-10-471 is an excellent device for filtering power line interference. It can be used in a variety of applications, from residential and commercial power systems to industrial and medical applications. It is also designed to provide maximum protection and EMC filtering capabilities. The device is also easy to install and has a low cost. With its wide range of features, this device is an ideal choice for power line protection and EMC filtering.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT