NAP-04-102-D

Series:	NAP
Part Status:	Active
Filter Type:	Single Phase
Configuration:	Single Stage
Voltage - Rated DC:	250V
Voltage - Rated AC:	250V
Voltage - Rated AC (Phase to Ground/Neutral):	250V
Current:	4A
Frequency - Operating:	--
Applications:	General Purpose
Approvals:	cURus, VDE
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	DIN Rail
Termination Style:	Terminal Block
Inductance:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NAP-04-102-D Power Line Filter Modules Application Field and Working Principle

Power line filter modules have been in use for many decades. They are utilized to separate noisy electrical signals from the desired useful signals. NAP-04-102-D is a type of power line filter module specifically used to reduce spikes and dips in power supplies. It is designed to be used for applications such as computer power supplies, industrial electronic systems, and other AC-operated movers and loads.A power line filter module’s main purpose is to suppress interference from the power supply. It works by filtering out stray electrical currents caused by electrostatic discharges, noise, and other forms of electrical disturbances. For the NAP-04-102-D, it utilizes a combination of inductor and capacitor components to filter out spurious signals along the power line. The inductor, in this case the wire coil, acts as a low pass filter, stopping any spikes in the power supply by having a high reactance in the AC system. At the same time, the capacitor works as a high-pass filter, stopping any dips in voltage due to its low reactance in the AC. The combination of both inductor and capacitor creates a filter which works to provide clean stable power to any device connected to the filter module.The NAP-04-102-D also offers surge protection, as its components act as a shield for downstream circuits. It is designed to suppress up to 20ms of surge pulses of the 60V/60Hz frequency, which are the most common interferences found in power supplies. The module also offers over/under voltage protection, as it blocks any power from going into the system if it is over or under the acceptable level.Due to its low EMI (electromagnetic interference) and low frequency performance, the NAP-04-102-D is ideal for use in computer power supplies, as its components can reduce the amount of electromagnetic interference that is emitted from the device. The module is also suitable for a wide variety of industrial applications, including motor and pump systems, industrial automation, and instrumentation. The NAP-04-102-D has also been tested for safety and reliability. It is UL-listed, which means that it has been tested to meet the safety requirements laid out by the Underwriters Laboratories. The module is also rated IP67, which means that it is designed to withstand the dust and water ingression of a washdown environment.In conclusion, the NAP-04-102-D is a type of power line filter module specifically designed to reduce spikes and dips in power supplies. It utilizes a combination of inductor and capacitor components to filter out electrical signals that could interfere with the power supply. This type of power line filter module is suitable for use in a wide variety of applications and environments due to its high surge and voltage protection capabilities and its low EMI and low frequency performance. It also meets the safety requirements of the Underwriters Laboratories and the dust and water ingression of a washdown environment.

The specific data is subject to PDF, and the above content is for reference