NAP-04-222-D

Series:	NAP
Part Status:	Active
Filter Type:	Single Phase
Configuration:	Single Stage
Voltage - Rated DC:	250V
Voltage - Rated AC:	250V
Voltage - Rated AC (Phase to Ground/Neutral):	250V
Current:	4A
Frequency - Operating:	--
Applications:	General Purpose
Approvals:	cURus, VDE
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	DIN Rail
Termination Style:	Terminal Block
Inductance:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules

The NAP-04-222-D is a power line filter module which is a passive electronic device used to suppress interference on the electricity supply line. The module uses capacitors, inductors, and diodes to filter out certain frequencies and provides a clean power signal free from EMI/RFI noise. The module is designed to filter out EMI/RFI noises and harmonics on the line to improve system performance and reduce system malfunction.The NAP-04-222-D has many different applications in various power systems. One application is to suppress the high frequency noise from motors and other load drivers. This allows the load to be reliably powered without causing interference with other electronic devices. It can also be used to protect sensitive electronics that are connected to the power line from being affected by the noise generated by the other components.The filter modules consist of two parts; the main section and the capacitor section. The main section is composed of inductors and/or capacitors, depending on the application. The main inductors act to reduce the high frequency noise and also provide the necessary impedance for the low frequency noise. The capacitors act to store the high frequency noise. The main inductors and capacitors act together to reduce the noise on the power line.The capacitor section consists of individual capacitors that are connected in series or parallel in order to reduce the EMI/RFI noise. These capacitors are usually of the tantalum type, since they are very stable and can handle the high frequency noise. The capacitor section is connected to the main section to complete the filter circuit.The principles of operation of the NAP-04-222-D are based on the principle of impeding the flow of interference current by using the inductor and the capacitor to block the high frequency noise from entering the power line. The filtered power signal is then applied to the load driver which enables it to run more reliably and efficiently without interference from the outside. The main advantages of the NAP-04-222-D power line filter modules are that they are cost-effective, easy to install, and are effective in reducing EMI/RFI noise on the power line. The filters can be used in both AC and DC power applications and can provide a great deal of protection against high frequency EMI/RFI noise. Furthermore, they are very reliable and have a long service life. In conclusion, the NAP-04-222-D power line filter module is a passive device used to filter out EMI/RFI noise and harmonics on the power line. The filter is composed of two parts; the main section and the capacitor section. The main section is composed of inductors and/or capacitors while the capacitor section consists of individual capacitors in series or parallel. The principles of operation of the NAP-04-222-D filter are based on impeding the flow of interference current, thus providing a clean and reliable power signal for the load driver. The NAP-04-222-D provides cost-effective, easy to install, and effective power line filtering and is a reliable and long-lasting device.

The specific data is subject to PDF, and the above content is for reference