Allicdata Part #: | 1776-1416-ND |
Manufacturer Part#: |
NAP-06-472 |
Price: | $ 19.65 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 6A CHAS |
More Detail: | N/A |
DataSheet: | NAP-06-472 Datasheet/PDF |
Quantity: | 4 |
1 +: | $ 17.86050 |
10 +: | $ 17.30360 |
25 +: | $ 16.74540 |
50 +: | $ 16.18720 |
100 +: | $ 15.62900 |
250 +: | $ 13.95450 |
Series: | NAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 6A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules
The NAP-06-472 power line filter module is used to reduce the likelihood of interference on a variety of power lines. It operates by current limiting any impulse current such as lightning strikes and surges from external sources, while preventing disturbances originating from the load itself. This module is designed for use in mobile applications such as robotics, transportation and medical devices where the requirement is for low electrical noise on the power line.
The module consists of a high-quality line filter, a current-limiting resistor, a capacitor bank, and two diodes (one NPN and one PNP). The line filter acts to block any electromagnetic noise generated by the load itself or any external noise sources, while the capacitor bank acts to limit any arcing current as a result of contact with static or lightning-induced transients.
The current-limiting resistor operates by dissipating any large transients into the module. The resistor prevents large surges or impulses from entering or leaving the module, thereby allowing for a safe operation of the device. The diodes act to shunt any transients that may occur on the power line, providing extra protection. Additionally, the diodes also act as a protection device against reverse-voltage or overvoltage.
The NAP-06-472 power line filter module is designed for use with electric motors and other electric equipment up to 122VAC. It is designed to provide protection against transients and overvoltage on the power line, as well as provide voltage, current and frequency regulation. The module is constructed from phosphor bronze, which has excellent electrical conductivity, and is also resistant to wear and tear. The module is small and lightweight, and is designed for installation in tight spaces.
The NAP-06-472 is suitable for a wide range of applications such as electric motors, inverters, switching supplies, and other equipment up to 122VAC. It is also commonly used in medical, automotive, and robotics applications. The module is UL and CE compliant, and meets all applicable requirements for safety and performance.
In any mobile application, it is important to have a reliable filter module to prevent any possible electrical interference from affecting the performance of the device. The NAP-06-472 power line filter module is designed to provide this protection in a convenient and cost-effective package. With its high-quality components, durable construction, and effective operation, the NAP-06-472 filter module provides a reliable and easy-to-use solution for mobile applications.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT