Allicdata Part #: | NAP-10-000-DXE-ND |
Manufacturer Part#: |
NAP-10-000-DXE |
Price: | $ 24.52 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 10A DIN |
More Detail: | N/A |
DataSheet: | NAP-10-000-DXE Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 22.28940 |
Series: | NAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
。Power line filter modules, such as the NAP-10-000-DXE, are a type of EMI/RFI Filter specifically designed for power line applications. EMI or electro-magnetic interference is a phenomenon caused by the presence of electric and magnetic fields that can affect the performance of electronic components and systems, and is a major concern for designers and engineers. To address this, EMI filters can be used to reduce or eliminate interference by attenuating unwanted frequencies.
The NAP-10-000-DXE is an example of a single-ended, three-phase EMI/RFI filter with a nominal voltage of 10A. It is designed and manufactured to meet UL/CSA, VDE, CE, and FCC requirements. Designed with an embedded filter core, the NAP-10-000-DXE features the ability to filter out noise and attenuate conducted EMI/RFI in power line applications.
The EMI/RFI filter module works through the process of impedance matching. When the device is connected to power lines, the conductors, inductive components, and capacitors form an impedance network. This impedance network acts to block or pass specific frequencies, while allowing the desired frequencies to pass through untouched. Thus, the device works to reduce or eliminate undesired EMI/RFI, while maintaining signal integrity and power efficiency.
The NAP-10-000-DXE is designed to meet a variety of power line applications, including automotive, commercial, and industrial. It is designed to operate within a wide temperature range of -40°C to 85°C and a wide frequency range of 10Hz to 100 Mbps. Additionally, the device is designed with an embedded capacitor array consisting of two safety certified capacitors which provide additional signal clean protection.
Aside from its EMI/RFI filtration capabilities, the NAP-10-000-DXE also provides several safety features. The device is designed with over-voltage protection, which will protect against voltage spikes, along with short circuit protection. There is also thermal protection built in to the device, which will shut off the power should the module get too hot. Finally, the device has transient suppression protection, ensuring that surge-level voltages cannot damage the module, components, or circuitry connected to it.
In addition to providing filtering, noise attenuation, and safety features, the NAP-10-000-DXE also offers low power consumption and high efficiency. This is important in applications where power consumption is a concern, such as automotive and battery-operated systems. As a result, the NAP-10-000-DXE is an ideal solution for designers and engineers looking to protect power lines from EMI/RFI and maintain signal integrity and efficiency.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT