Allicdata Part #: | NAP-10-102-DXU-ND |
Manufacturer Part#: |
NAP-10-102-DXU |
Price: | $ 24.52 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 10A DIN |
More Detail: | N/A |
DataSheet: | NAP-10-102-DXU Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 22.28940 |
Series: | NAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The NAP-10-102-DXU is a power line filter module, which is typically used in a variety of electronic systems. The purpose of this module is to prevent current spikes, spikes generatedby sudden changes in the system\'s load and to reduce power line noise from entering the system. It is an effective way to make sure the system receives clean, unadulterated power.
The NAP-10-102-DXU is quite versatile, designed to serve as a two-stage, low-pass filter. The two-stage low pass filter helps reduce interference from high-frequency noise, such as RF signals while simultaneously blocking high-frequency transients and other AC line disturbances.
This power line filter operates using a series inductor and parallel capacitor connected in a three-pole configuration. In its simplest form, this configuration appears as one inductive element in series with the AC power line and two capacitive elements in parallel to the line. The inductive element and one of the capacitive elements form a low-pass filter, while the remaining capacitive element acts as a load for the filter // can change
The impedance of the filter module is determined by the frequency of the signal and the values of the components used. This low-pass filter module is usually rated at 130kHz and designed such that its output impedance is relatively constant over this frequency range. This component can exhibit higher electrical noise from the range beyond the rated frequency.
The NAP-10-102-DXU features high surge current capability and strong insulation resistance that is implemented with windings that are protected from outside noise. It also features multiple protection circuits to ensure that the module works within its rated power range. This is done by monitoring the power consumed by the module, and if it exceeds the specified value, the module will shut down or reduce the power consumed.
The input and output connections of the module are arranged in an L-shape, allowing for easy connection with other components in the system. The overall form factor of the module makes it perfect for use in space-constrained applications that require good electromagnetic compatibility (EMC).
The NAP-10-102-DXU is a great way to protect electronic systems from electrical interference and reduce the noise that can cause system failure. It is also easy to install and use, making it ideal for a variety of applications. With its high surge current capability and strong electrical insulation, this power line filter module is an ideal way to keep AC power clean and unadulterated.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT