Allicdata Part #: | NAP-10-222-DXE-ND |
Manufacturer Part#: |
NAP-10-222-DXE |
Price: | $ 24.52 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 10A DIN |
More Detail: | N/A |
DataSheet: | NAP-10-222-DXE Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 22.28940 |
Series: | NAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The NAP-10-222-DXE module is an example of a power line filter module, a type of conductor designed to filter out certain types of electrical noise and interference. Power line filter modules are used in a variety of electronic equipment to reduce the levels of electromagnetic interference created by the device and reduce the possibility of interference from external sources.
The NAP-10-222-DXE module is a three-phase module designed for reducing harmonic content. It operates by coupling a set of inductive and capacitive elements in a circuit. The inductive elements reduce the harmonic content of the current, while the capacitive elements help filter out higher frequency noise. The module is designed to reduce the harmonic content by up to 40 dB.
The NAP-10-222-DXE module is composed of three separate parts, two of which are magnetically coupled: a center leg, an outer leg, and a capacitor. The center leg is a static inductor, and consists of a coil which is wound with heavy gauge wire. The outer leg is the dynamic inductor, and is composed of two coils wound in series. The center leg provides the primary filtering of the current, and the outer leg provides the harmonic suppression. The capacitor provides an adjustable impedance to the filter, allowing it to be tuned to block different frequencies of noise.
The NAP-10-222-DXE module is primarily used in power supply systems, motor control systems, industrial power systems, and telecommunications equipment. It is designed to filter out frequencies from 200 Hz to the kHz range, and can reduce the harmonic content of the current by up to 40 dB. This makes it suitable for applications where the noise is primarily caused by harmonics, such as in motor control systems. The module can also be used in systems where sources of radiated noise, such as radio and microwave transmissions, need to be suppressed.
In addition to harmonic suppression, the NAP-10-222-DXE module can also be used for providing isolation from transient over-voltages due to switching or lightning. The center leg can be used as an isolation conductor, allowing the current to pass through the module without being affected by external noise or transients. This makes it suitable for applications such as railway control systems, home appliance motors, inverter circuits, etc., where surge currents occur.
Overall, the NAP-10-222-DXE module is a versatile, high-performance power line filter module designed for suppressing harmonics, isolating from transients, and reducing electromagnetic interference. It is highly reliable and can be used in a wide variety of applications where the suppression of harmonics or isolation from external noise is required.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT