Allicdata Part #: | NAP-10-681-D-ND |
Manufacturer Part#: |
NAP-10-681-D |
Price: | $ 24.52 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 10A DIN |
More Detail: | N/A |
DataSheet: | NAP-10-681-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 22.28940 |
Series: | NAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules
Power Line Filter Modules are a type of electronic filter that assists power-line based communications by allowing the desired signals to pass while at the same time filtering out any unwanted noise and electrical interference. The NAP-10-681-D module is a type of power line filter module manufactured by the Noramco Corporation. It is designed to be used in a wide range of applications, such as those related to power supply noise reduction, data transfer, radio frequency interference, and electromagnetic compatibility.
To be more specific, the NAP-10-681-D is a Passive Filter Module, which means that it does not contain any active components (such as transistors or integrated circuits). The filter is constructed with multiple coils or inductors, one of which is connected in parallel with the input signal. This enables the module to provide up to 20dB of common mode isolation (as opposed to just 7dB of isolation in the case of single-inductance filter modules). In addition to this, the module also incorporates EMI/RFI protection, which allows it to reject any frequencies that are not included in the desired signal range.
When it comes to the working principle of the NAP-10-681-D module, it is relatively simple. It consists of multiple inductors that are connected to the input and output lines of the system, each of which is designed to reject any unwanted noise or interference. The inductors act as low-pass filters, meaning that they allow signals with lower frequencies to pass while attenuating the higher frequencies. This means that any noise frequencies that fall outside of the desired signal range will be attenuated by the filter.
The NAP-10-681-D module is suitable for a variety of applications. It is used in power supply noise reduction, as it helps to reduce unwanted interference caused by RF signals, such as in the case of electric motors or power converters. It can also be used in data transfer applications, as it enables the transmission of digital data over noisy power lines. Furthermore, it is also used in radio frequency interference mitigation, as it can help to reduce any unwanted noise or interference that may affect the radio frequencies that are used by the system.
In conclusion, the NAP-10-681-D module is a type of Passive Filter Module that is used to reduce the amount of interference caused by RF signals, as well as providing EMI/RFI protection. It is suitable for applications related to power supply noise reduction, data transfer, radio frequency interference, and electromagnetic compatibility. Its working principle is based on the use of multiple inductors, which act as low-pass filters that prevent any signals with higher frequencies from reaching the desired frequency range. Overall, the NAP-10-681-D is a reliable and effective module for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT