Allicdata Part #: | NAP-30-471-DXE-ND |
Manufacturer Part#: |
NAP-30-471-DXE |
Price: | $ 28.64 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 30A DIN |
More Detail: | N/A |
DataSheet: | NAP-30-471-DXE Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 26.04420 |
Series: | NAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 30A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
NAP-30-471-DXE is a Power Line Filter Module generally used in a wide range of industrial applications that require protection against power line noise. This type of filter allows the use of sensitive electronic equipment in noisy industrial environments without experiencing problems that may affect the operation. It provides the protection required from the power line to a wide range of components, from integrated circuits to printed circuit boards.
The main components of the filter are two inductive components, a common-mode choke and two capacitors. The common-mode choke works to suppress common-mode noise on the power lines. The capacitors function as filtering devices to reduce high-frequency noise. The combination of these components provides the necessary filtering to eliminate noise on the power lines while allowing the power required for the application.
When used in applications where the noise is particularly severe, the inductors can be used to reduce the amount of noise entering the system. This involves increasing the inductance of the chokes until the noise is sufficiently reduced. The capacitor also helps to reduce the noise and allows for a more efficient operation due to less power loss.
The filter is also designed to be used in very low to zero voltage applications. The low voltage applications require very low impedance devices and the NAP-30-471-DXE filter can meet this requirement. When used in zero voltage applications, the filter can be used to protect sensitive components from damage due to out-of-range voltages. In addition, the low impedance of the filter allows for efficient operation of the system.
The NAP-30-471-DXE Power Line Filter Module can be used in a variety of applications and is designed to provide optimal protection against power line noise. The combination of inductors and capacitors provides the necessary power line filtering to allow for a more efficient and reliable operation. In zero voltage applications, the filter is able to protect sensitive components from damage due to out-of-range voltages. The filter is also designed to be used in very low to zero voltage applications and can meet the requirements of these applications.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT