Allicdata Part #: | 223-1774-ND |
Manufacturer Part#: |
NB-PTCO-006 |
Price: | $ 1.39 |
Product Category: | Sensors, Transducers |
Manufacturer: | TE Connectivity Measurement Specialties |
Short Description: | SENSOR RTD 1KOHM +/-0.3% 2SIP |
More Detail: | 1 kOhms RTD Platinum ±0.001% ±3850ppm/°C -50°C ~ 6... |
DataSheet: | NB-PTCO-006 Datasheet/PDF |
Quantity: | 6993 |
1 +: | $ 1.26000 |
5 +: | $ 1.19070 |
10 +: | $ 1.02060 |
25 +: | $ 0.81648 |
50 +: | $ 0.74844 |
100 +: | $ 0.68040 |
500 +: | $ 0.59535 |
1000 +: | $ 0.52731 |
5000 +: | $ 0.49329 |
Resistance Tolerance: | ±0.3% |
RTD Material: | Platinum |
Operating Temperature: | -50°C ~ 600°C |
Termination: | PC Pins |
Accuracy: | ±0.3% |
Temperature Coefficient: | ±3850ppm/°C |
Current: | 400µA |
Mounting Type: | Through Hole |
Package / Case: | 2-SIP |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Resistance @ 0°C: | 1 kOhms |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Temperature Sensors - RTD (Resistance Temperature Detector) are used to measure temperature accurately. The RTD (Resistance Temperature Detector) is a type of temperature sensor. It is a wire wound resistor that has a constant resistance over a range of temperatures. The resistance of the RTD element is measured with a Wheatstone bridge circuit. The RTD element is put into a bridge configuration to make the measurement. The output from the bridge rectifier is fed into a voltage to temperature conversion circuit.
NB-PTCO-006 is a Resistance Temperature Detector designed for industrial applications. It is commonly used in industrial applications with temperatures ranging from -50°C to 120°C (-58°F to 248°F) and is suitable for both air and liquids. The sensor utilizes a Mineral Insulated (MI) Platinum Resistance Element. This allows for a highly accurate and robust temperature sensing solution. The output of the PTCO-006 is a standard Wheatstone bridge signal which is then corrected by an onboard analog circuit to produce a temperature proportional voltage.
The NB-PTCO-006 utilizes a Wheatstone bridge configuration, which is a full-bridge configuration. In a full-bridge configuration, two identical resistors are placed on either side of the RTD. When the temperature changes, a voltage is produced across one of the resistors, which is then used to calculate the temperature. The Wheatstone bridge configuration allows for very accurate and stable temperature measurements.
The NB-PTCO-006 also utilizes a special internal circuit to correct for errors caused by environmental factors such as ambient temperature, humidity, pressure and noise. The internal circuit is calibrated to compensate for these environmental influences and produces a temperature signal that is accurate and stable over a wide range of temperatures. The temperature signal is then fed into a voltage-to-temperature conversion circuit, which converts the signal into a temperature proportional voltage.
The NB-PTCO-006 is a highly robust and reliable RTD sensor designed for industrial applications. It utilizes a Wheatstone bridge configuration and incorporates an internal circuit to compensate for errors caused by environmental influences. The output of the RTD is a temperature-proportional voltage which can then be used to accurately and reliably measure temperatures in a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
PTS 1206-2B PU 1KRTD Platinum 3850ppm/C...
SENSOR TEMPRTD Cylinder, Metal
SENSOR TEMPRTD Cylinder, Metal
PLATINUM RTD 1K OHM +/-0.12%1 kOhms RTD ...
RTD PROBE 1K OHM .06% LUG1 kOhms RTD 3...
HTRS DISCRETE AND PACKAGED RTD1 kOhms RT...