NI-10M-2405

Frequency Stability:	±10ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.500" (12.70mm)
Size / Dimension:	1.430" L x 1.070" W (36.32mm x 27.18mm)
Package / Case:	6-DIP (1.000", 25.40mm), 5 Leads
Mounting Type:	Through Hole
Ratings:	--
Current - Supply (Max):	800mA
Operating Temperature:	-40°C ~ 85°C
Series:	NI-10M-2400
Voltage - Supply:	5V
Output:	LVTTL
Function:	--
Frequency:	10MHz
Type:	OCXO
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

The NI-10M-2405 oscillator is an inexpensive, low power, and robust device designed to help monitor voltage deviations throughout the system. Its purpose is to accurately detect and measure electrical variations such as voltage differences and noise. The NI-10M-2405 is useful in applications such as power lines, air conditioning units, and mechanical devices.The NI-10M-2405 oscillator consists of two parts—a monitoring circuit and a feedback circuit. The monitoring circuit consists of two diodes connected in series and a capacitor connected to the positive lead of the diodes. The capacitor is used to store charge for the oscillator to use when a voltage difference is detected. The feedback circuit consists of two resistors connected in series and a capacitor connected between the positive leads of the resistors. This capacitor helps to maintain the storage capacitor’s charge when the input voltage changes.When a voltage difference is detected by the monitoring circuit, the charge stored in the feedback capacitor flows into the storage capacitor, which causes the voltage on the output of the oscillator to change. This voltage change is then used to detect any voltage differences that may be present.The NI-10M-2405 oscillator has a frequency range of 0.2 Hz to 20 kHz and a temperature coefficient of ± 0.025°/C. It has a maximum ripple voltage of 2 mV and a maximum output current of 25 mA. Its ability to detect and measure small changes in voltage make it ideal for applications where accurate detection is required.The NI-10M-2405 oscillator is a versatile and reliable device that is suitable for a wide range of applications. It is a low power and cost-effective solution that is designed to accurately detect voltage differences and noise. Its robust design and wide frequency range make it suitable for use in industrial and commercial applications. Its temperature coefficient and maximum ripple voltage also make it suitable for deployments in temperature sensitive environments. The NI-10M-2405 is an ideal choice for applications that require voltage monitoring and precision measurements.

The specific data is subject to PDF, and the above content is for reference