Allicdata Part #: | NI-10M-2504-ND |
Manufacturer Part#: |
NI-10M-2504 |
Price: | $ 80.05 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Taitien |
Short Description: | OSC OCXO 10.0000MHZ SNWV DIP |
More Detail: | 10MHz OCXO Sine Wave Oscillator 5V 6-DIP (1.000",... |
DataSheet: | NI-10M-2504 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 72.04960 |
Frequency Stability: | ±5ppb |
Current - Supply (Disable) (Max): | -- |
Height - Seated (Max): | 0.500" (12.70mm) |
Size / Dimension: | 1.430" L x 1.070" W (36.32mm x 27.18mm) |
Package / Case: | 6-DIP (1.000", 25.40mm), 5 Leads |
Mounting Type: | Through Hole |
Ratings: | -- |
Current - Supply (Max): | 800mA |
Operating Temperature: | -40°C ~ 85°C |
Series: | NI-10M-2500 |
Voltage - Supply: | 5V |
Output: | Sine Wave |
Function: | -- |
Frequency: | 10MHz |
Type: | OCXO |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators
The NI-10M-2504 is a multi-purpose digital oscillator with the ability to produce sine, triangle, and square wave forms for a variety of applications. It can be used to generate precise frequency control signals for testing, troubleshooting, measuring, and calibrating electronic and electrical components such as resistors, capacitors, and inductors. The oscillator features a wide frequency range of 5 Hz to 250 kHz, and is capable of producing wave forms with up to 15 V peak-to-peak amplitude.
Application Field of NI-10M-2504
The NI-10M-2504 is ideal for use in engineering labs, industrial test laboratories, and general purpose measuring setups. It is used for applications such as frequency response measurements, component testing, and RF signal testing. It is also used in electronic assembly, RF signal generation and waveform analysis, and for signals used in industrial control systems.
Working Principle of NI-10M-2504
The NI-10M-2504 works by receiving an input signal. This signal can be analog or digital, depending on the application. The input signal is then converted into a PWM signal by an internal digital-to-analog converter (DAC). This PWM signal is then fed to an internal amplifier, which is then used to drive a low pass filter. The filter then produces the desired output waveform, which can be a sine wave, triangle wave, or square wave.
The NI-10M-2504 also features an advanced signal output setup, which includes slew rate control and frequency adjustment for more precise control. This makes the oscillator ideal for producing very accurate waveforms for measurement and testing.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...