
NL-SW-LTE-TM1G-V RF/IF and RFID |
|
Allicdata Part #: | 1477-1061-ND |
Manufacturer Part#: |
NL-SW-LTE-TM1G-V |
Price: | $ 54.75 |
Product Category: | RF/IF and RFID |
Manufacturer: | NimbeLink, LLC |
Short Description: | SKYWIRE CELLULAR MODEM LTE CAT |
More Detail: | N/A |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 49.77000 |
100 +: | $ 47.25010 |
500 +: | $ 43.47000 |
Serial Interfaces: | UART, USB |
Package / Case: | 20-DIP Module |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Through Hole |
Current - Transmitting: | -- |
Current - Receiving: | -- |
Voltage - Supply: | 1.65 V ~ 5.5 V |
Memory Size: | -- |
Utilized IC / Part: | -- |
Antenna Type: | Not Included, U.FL |
Series: | Skywire™ |
Sensitivity: | -- |
Power - Output: | -- |
Frequency: | -- |
Modulation: | -- |
Protocol: | GNSS, LTE |
RF Family/Standard: | Cellular, Navigation |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
?Introduction of NL-SW-LTE-TM1G-V
NL-SW-LTE-TM1G-V transceiver module belongs to part of RF transceiver module family, and the concept of which is developed from the conventional wireless communication concept. It’s a combined signal processing system with a communication function and a transmission & reception function of the frequency band.
Application Field
The NL-SW-LTE-TM1G-V transceiver module is specifically applied in the 4G communications systems, especially LTE. Also, as a high-frequency, medium-capacity and low-cost RF module, it is widely used in various wireless communication products, such as GSM/EDGE, CDMA, WCDMA, TD-SCDMA, CDMA2000, WLAN802.11, GPS, and UMB.
Working Principle
The NL-SW-LTE-TM1G-V transceiver is a digital and analog two-way transceiver. It combines the Baseband and RF into one module. The block diagram of structural module is shown in figure 1. It is based on the multi-chip module (MCM) technology, and its substrate integrated waveguide technology (SIW) is used for the antenna and RF module.
In detail, when the RF signal of current frequency band is received, the signals are converted to the IF signal by the front-end RF modules which are composed of RF amplifiers, mixers, frequency divider filters, etc. And the IF signal will be amplified and filtered, then converted to the digital signal by the ADC after analyzing. After beeing processed in the baseband processor, the signal is converted to the analog signal through the DAC process, and transmitted to the RF module for transmitting again.
Conclusion
In terms of features, the NL-SW-LTE-TM1G-V transceiver module has advantages such as low power consumption, low cost and small size size, which help it to meet a variety of application requirements. Furthermore, its wide application field in 4G communications systems, especially LTE, makes it highly welcome by the market.
The specific data is subject to PDF, and the above content is for reference
2.4GHz transceiver, 64MHz Arm Cortex M4F...

ENET-ZBP113 ZIGBEE MODULE

RF TXRX MODULE ISM>1GHZ U.FL ANT

RF TXRX MOD BLUETOOTH/WIFI U.FL

RF TXRX MOD CELLULAR/NAV U.FL

RF TXRX MODULE ISM ...
